Page images
PDF
EPUB

30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR-Continued

30 CFR API Manual of Petroleum Measurement Standards, Chapter 11.2.3, 250.1;

Water Calibration of Volumetric Provers, First Edition, 1984, API 250.180(d)(3)(iv)

Stock No. 852-27310.
API Manual of Petroleum Measurement Standards, Chapter 12.2, Cal- 250.1;

culation of Liquid Petroleum Quantities Measured by Turbine or 250.180(c)(6)(ix). Displacement Meters, First Edition, September 1981, API Stock No. (d)(3)(v)(A), and 852-30302.

(d)(3)(v)(C) API Manual of Petroleum Measurement Standards, Chapter 14.3, Ori- 250.1; 250.181(c)(1)

fice Metering of Natural Gas and Other Related Hydrocarbon Fluids,

Second Edition, September 1985, API Stock No. 852–30343.
API Manual of Petroleum Measurement Standards, Chapter 14.5, Cal- 250.1; 250.181(c)(1)

culation of Gross Heating Value. Specific Gravity, and Compressibil-
ity of Natural Gas Mixtures from Compositional Analysis, First
Edition, January 1981, API Stock No. 852-30345.
API Manual of Petroleum Measurement Standards, Chapter 14.6, In- 250.1; 250.181(c)(1)

stalling and Proving Density Meters Used to Measure Hydrocarbon Liquid with Densities Between 0.3 to 0.7 gm/cc at 15.56 Degrees C (60 Degrees F) and Saturation Vapor Pressure, First Edition, Septem

ber 1979, API Stock No. 852-30346.
API Manual of Petroleum Measurement Standards, Chapter 14.8. Liq- 250.1; 250.181(c)(1)
uefied Petroleum Gas Measurement, First Edition, February 1983,

API Stock No. 852-30348.
The American Society for Testing and Materials

1916 Race Street, Philadelphia, Pennsylvania 19103 ASTM Standard C33–86, Standard Specification for Concrete Aggre- 250.1; 250.138(b)(4)(i)

gates, including Nonmandatory Appendix, 1986.
ASTM Standard C94–86b, Standard Specification for Ready-mixed 250.1; 250.138(e)(2)(i)

Concrete, 1986.
ASTM Standard C150–86, Standard Specification for Portland Cement, 250.1; 250.138(b)(2)(i)

1986.
ASTM Standard C330–87. Standard Specification for Light-weight Ag- 250.1; 250.138(b)(4)(i)

gregates for Structural Concrete. ASTM Standard C595–86. Standard Specification for Blended Hydrau- 250.1; 250.138(b)(2)(i)

lic Cements, 1986.
The American Welding Society

550 NW. Lejeune Road, P.O. Box 351040, Miami, Florida 33135
D1.1-86, Structural Welding Code-Steel, 1986 including Commentary .. 250.1; 250.137(b)(1)(i)
D1.4-79. Structural Welding Code-Reinforcing Steel, 1979....... 250.1; 250.138(e)(3)(ii)
The National Association of Corrosion Engineers

P.O. Box 218340, Houston, Texas 77218
NACE Standard MR-01-75 (1984 Editorial Revision), Material Require- 250.1; 250.67(1)(1),

ments, Sulfide Stress Cracking Resistant Metallic Material for Oil (1)(2). (1)(3), and
Field Equipment, with Supplement 1 issued January 1985. Supple- (1)(6)
ment 2 issued February 1985. Supplement 3 issued March 1985,
Supplement 4 issued May 1985. Supplement 5 issued July 1985,
Supplement 6 issued August 1985, Supplement 7 issued February

1986, and Supplement 8 issued September 1986. NACE Standard RP-01-76 (1983 Revision), Recommended Practice, 250.1; 250.137(d)

Corrosion Control of Steel, Fixed Offshore Platforms Associated with Petroleum Production.

30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR-Continued

30 CFR API Manual of Petroleum Measurement Standards, Chapter 6.6, Pipe- 250.1; 250.180(c)(6)

line Metering Systems, First Edition, August 1981, API Stock No. (iii)(B)

852-30126. API Manual of Petroleum Measurement Standards, Chapter 6.7, Meter- 250.1; 250.180(c)(6)

ing Viscous Hydrocarbons, First Edition, January 1981, API Stock (iii)(C)

No. 852-30127. API Manual of Petroleum Measurement Standards, Chapter 7.2. Dy. 250.1; 250.180(c)(6)

namic Temperature Determination. First Edition, June 1985, API (iv)(A), and (f)(2) Stock No. 852-30142.

(iii)(A) API Manual of Petroleum Measurement Standards, Chapter 7.3, Static 250.1; 250.180(c)(6)

Temperature Determination Using Portable Electronic Thermom- (iv)(B), and eters, First Edition, July 1985, API Stock No. 852–30143.

(1)(2)(iii)(B) API Manual of Petroleum Measurement Standards. Chapter 8.1, 250.1;

Manual Sampling of Petroleum and Petroleum Products, First Edi- 250.180(C)(6)(v), tion, October 1981, API Stock No. 852-30161.

and (012)(iv) API Manual of Petroleum Measurement Standards, Chapter 8.2, Auto- 250.1;

matic Sampling of Petroleum and Petroleum Products, First Edition, 250.180(c)(6)(v), April 1983, API Stock No. 852–30162.

and (012)(iv) API Manual of Petroleum Measurement Standards, Chapter 9.1, Hy- 250.1;

drometer Test Method for Density, Relative Density (Specific Gravi- 250.180(c)(6)(vi), ty), or API Gravity of Crude Petroleum and Liquid Petroleum Prod- and (1(2)(v)

ucts, First Edition, June 1981, API Stock No. 852–30181. API Manual of Petroleum Measurement Standards, Chapter 9.2, Pres- 250.1;

sure Hydrometer Test Method for Density or Relative Density, First 250.180(c)(6)(vi). Edition, April 1982, API Stock No. 852-30182.

and (012)(v) API Manual of Petroleum Measurement Standards, Chapter 10.1, De- 250.1; 250.180(c)(6)

termination of Sediment in Crude Oils and Fuel Oils by the Extrac- (vii)(A), and tion Method, First Edition, April 1981, API Stock No. 852-30201.

(f)(2)(vi)(A) API Manual of Petroleum Measurement Standards, Chapter 10.2. De- 250.1; 250.180(c)(6)

termination of Water in Crude Oil by the Distillation Method, First (vii)(B), and Edition, April 1981, API Stock No. 852–30202.

()(2)(vi)(B) API Manual of Petroleum Measurement Standards, Chapter 10.3, De- 250.1; 250.180(c)(6)

termination of Water and Sediment in Crude Oil by the Centrifuge (vii)(C). and Method (Laboratory Procedure), First Edition, April 1981, API Stock (1)(2)(vi)(C)

No. 852-30203.
API Manual of Petroleum Measurement Standards, Chapter 10.4 (Pub. 250.1; 250.180(c)(6)

L. 2542), Standard Methods of Test for Water and Sediment in Crude (vii)(D), and
Oils, October 1970, API Stock No. 825–25420.

(1)(2)(vi)(D) API Manual of Petroleum Measurement Standards, Chapter 11.1, 250.1; 250.180(c)(6)

Volume Correction Factors, Volume I, Table 5A-Generalized Crude (viii)(A),
Oils and JP-4 Correction of Observed API Gravity to API Gravity at (d)(3)(v)(B), and
60 Degrees F, and Table 6A—Generalized Crude Oils and JP-4 (1(2)(vii)
Correction of Volume to 60 Degrees F Against API Gravity at 60

Degrees F, First Edition, August 1980, API Stock No. 852-27000.
API Manual of Petroleum Measurement Standards, Chapter 11.2.1, 250.1; 250.180(C)(6)

pressibility Factors for Hydrocarbons: 0–90 Degre API Gravi. (viii)(B) ty Range, First Edition, August 1984, API Stock No. 852–27300. API Manual of Petroleum Measurement Standards, 11.2.2, Compress- 250.1; 250.180(c)(6)

ibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 (viii)(C)
Degrees F/60 Degrees F) and -50 Degrees F to 140 Degrees F
Metering Temperature, Second Edition, October 1986, API Stock No.
852-27307.

30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR-Continued

30 CFR API Manual of Petroleum Measurement Standards, Chapter 11.2.3. 250.1;

Water Calibration of Volumetric Provers, First Edition, 1984. API 250.180(d)(3)(iv)

Stock No. 852-27310.
API Manual of Petroleum Measurement Standards, Chapter 12.2, Cal- 250.1:

culation of Liquid Petroleum Quantities Measured by Turbine or 250.180(c)(6)(ix), Displacement Meters, First Edition, September 1981, API Stock No. (d)(3)(v)(A), and 852-30302.

(d)(3)(v)(C) API Manual of Petroleum Measurement Standards, Chapter 14.3, Ori- 250.1; 250.181(c)(1)

fice Metering of Natural Gas and Other Related Hydrocarbon Fluids,

Second Edition, September 1985, API Stock No. 852–30343. API Manual of Petroleum Measurement Standards, Chapter 14.5, Cal- 250.1; 250.181(c)(1)

culation of Gross Heating Value. Specific Gravity, and Compressibility of Natural Gas Mixtures from Compositional Analysis, First

Edition, January 1981, API Stock No. 852–30345. API Manual of Petroleum Measurement Standards, Chapter 14.6, In- 250.1; 250.181(c)(1)

stalling and Proving Density Meters Used to Measure Hydrocarbon Liquid with Densities Between 0.3 to 0.7 gm/cc at 15.56 Degrees C (60 Degrees F) and Saturation Vapor Pressure, First Edition, Septem

ber 1979, API Stock No. 852–30346. API Manual of Petroleum Measurement Standards, Chapter 14.8, Lig- 250.1; 250.181(c)(1)

uefied Petroleum Gas Measurement, First Edition, February 1983,

API Stock No. 852-30348.
The American Society for Testing and Materials

1916 Race Street, Philadelphia, Pennsylvania 19103 ASTM Standard C33–86, Standard Specification for Concrete Aggre- 250.1; 250.138(b)(4)(i)

gates, including Nonmandatory Appendix, 1986. ASTM Standard C94–86b, Standard Specification for Ready-mixed 250.1; 250.138(e)(2)(i)

Concrete, 1986. ASTM Standard C150–86, Standard Specification for Portland Cement, 250.1; 250.138(b)(2)(i)

1986. ASTM Standard C330–87, Standard Specification for Light-weight Ag- 250.1; 250.138(b)(4)(i)

gregates for Structural Concrete. ASTM Standard C595–86, Standard Specification for Blended Hydrau- 250.1; 250.138(b)(2)(i)

lic Cements, 1986. The American Welding Society

550 NW. Lejeune Road, P.O. Box 351040, Miami, Florida 33135 D1.1–86, Structural Welding Code-Steel, 1986 including Commentary .. 250.1; 250.137(b)(1)(i) D1.4–79, Structural Welding Code-Reinforcing Steel, 1979..

250.1; 250.138(e)(3)(ii) The National Association of Corrosion Engineers

P.O. Box 218340, Houston, Texas 77218 NACE Standard MR-01-75 (1984 Editorial Revision), Material Require- 250.1; 250.67(1)(1).

ments, Sulfide Stress Cracking Resistant Metallic Material for Oil (1)(2). (1)(3), and Field Equipment, with Supplement 1 issued January 1985, Supple- (1)(6) ment 2 issued February 1985, Supplement 3 issued March 1985, Supplement 4 issued May 1985, Supplement 5 issued July 1985, Supplement 6 issued August 1985, Supplement 7 issued February

1986, and Supplement 8 issued September 1986. NACE Standard RP-01-76 (1983 Revision), Recommended Practice, 250.1; 250.137(d)

Corrosion Control of Steel, Fixed Offshore Platforms Associated with Petroleum Production.

Table of CFR Titles and Chapters

(Revised as of June 12, 1993)

Title 1-General Provisions

I II III

Administrative Committee of the Federal Register (Parts 1–49)
Office of the Federal Register (Parts 50—299)
Administrative Conference of the United States (Parts 300-

399)
Miscellaneous Agencies (Parts 400—500)

IV

Title 2-(Reserved

Title 3—The President

I

Executive Office of the President (Parts 100—199)

Title 4-Accounts

I

II

General Accounting Office (Parts 1-99)
Federal Claims Collection Standards (General Accounting

Office-Department of Justice) (Parts 100—299)

Title 5-Administrative Personnel

I II III IV

V

VI

VII

Office of Personnel Management (Parts 1–1199)
Merit Systems Protection Board (Parts 1200–1299)
Office of Management and Budget (Parts 1300–1399)
Advisory Committee on Federal Pay (Parts 1400—1499)
The International Organizations Employees Loyalty Board

(Parts 1500–1599)
Federal Retirement Thrift Investment Board (Parts 1600-

1699)
Advisory Commission on Intergovernmental Relations (Parts

1700-1799)
Office of Special Counsel (Parts 1800—1899)
Appalachian Regional Commission (Parts 1900–1999)
United States Soldiers' and Airmen's Home (Parts 2100—2199)
Federal Labor Relations Authority, General Counsel of the

Federal Labor Relations Authority and Federal Service Im

passes Panel (Parts 2400-2499) Office of Administration, Executive Office of the President

(Parts 2500—2599)

VIII

IX XI XIV

XV

« PreviousContinue »