34 (d) TABLE P-3. Steel flanged fittings and companion flanges 150 pounds Nominal pipe size (in.) 1 NOTE: A raised face of 16 in. is included in minimum thickness of flanges. [Preceding table, P-3, superseded by following table, P-3, during period covered by this Supplement] TABLE P-3. Steel flanged fittings and companion flanges 1 The raised face of He inch is included in "thickness of flange minimum" and in "length through hub." A raised face of 6 inch is provided on the flange of each opening of these fittings and is included in (a) "thickness of flange, minimum," (b) "center to contact surface," and (c) "contact surface to contact surface" dimensions. [As amended by Order 124, June 7, 1941; 6 F.R. 2796] 1 NOTE: The raised face of 18 in. is included in "thickness of flange minimum" and in length through hub. 1 NOTE: A raised face of 4 in. is not included in the minimum thickness of flanges. TABLE P-6. Steel flanged fittings and companion flanges NOTE: A raised face of 4 in. is not included in the minimum thickness of flanges. 1 NOTE: A raised face of 14 in. is not included in the minimum thickness of flanges. TABLE P-8. Steel flanged fittings and companion flanges 1 NOTE: A raised face of 4 in. is not included in the minimum thickness of flanges. TABLE P-9. Steel flanged fittings and companion flanges 1 NOTE: The raised face of 4 in. is not included in "thickness of flange minimum" nor in "length through hub" or in "thread length." 2114 12 12 88222 ∞ ∞ ∞ ∞ 44444 1 2222 1 118 136 14 112 134 212 234 Metal thickness of fittings minimum (in.) Face-to-face dimension of length of tee |