Page images


7 CFR 345–78 REA specification for carbon arrester assemblies for use in 1755.97

protectors (PE–78) 2/80. 345–150 REA specifications and drawings for construction of direct 1755.97

buried plant (Form 515a) 7/89. 345–151 REA specifications and drawings for conduit and manhole 1755.97

construction (Form 5150) 7/89. 345–152 REA specifications and drawings for underground cable 1755.97

installation (Form 5150) 7/89. 345–153 REA specifications and drawings for construction of polo 1755.97

lines, aerial cables and wires (Form 515f) 7/89. 345–154 REA specifications and drawings for service entrance and 1755.97

station protector installations (Form 515g) 7/89. 345–168 REA specification for equipment for direct distance dialing 1755.97

(Form 538) 10/77. 345–180 REA specifications for voice frequency repeaters and voice 1755.97

frequency repeatered trunks (Form 397a) 1/63. 345–183 REA design specifications for point-to-point microwave radio 1755.97

systems (Form 397d) 6/70. 345–184 REA design specifications for mobile and fixed dial radio 1755.97

telephone equipment (Form 397e) 5/71.
Raptor Research Foundation, c/o Department of Veterinary Biology,

University of Minnesota, St. Paul, Minnesota 55101.
Suggested Practices for Raptor Protection on Power Lines, Raptor 1724.45

Research Report No. 4 (1981).
American Institute of Timber Construction (AITC)

333 West Hampden Avenue, Englewood, Colorado 80110, telephone

(303) 761–3212 American Institute of Timber Construction—200–83, Inspection Man- 1728.201; 1728.202

ual, 1987 edition. American National Standards Institute/American Institute of Timber 1728.202

Construction ANSI/AITC A190.1–1983, American National Stand

ard for Wood Products—Structural Glued Laminated Timber. American National Standards Institute/Electronic Industries Association (ANSI/ELA)

EIA, 201 Pennsylvania Ave., NW., suite 900, Washington, DC 20006,

tel.: 202-457-4966 ANSI/EIA 359–A-84, EIA Standard Colors for Color Identification 1755.860

and Coding. American National Standards Institute/Electronic Industries Association (ANSVEIA).

Copies made available through Global Engineering Documents, 15

Inverness Way East, Englewood, CO 80112
ANSI/EIA 359-A-84, EIA Standard Colors for Color Identification 1755.870

and Coding American National Standards Institute/Institute of Electrical and Electronics Engineers, Inc. (ANSVIEEE)

IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854, Tele

phone: 1-800-678–4333 1993 National Electrical Safety Code

1755.900(a)(6); (o)(2) American National Standard Institute/Insulated Cable Engineers Association, Inc. (ICEA)

ICEA, P.O. Box 440, South Yarmouth, MA 02664, tel.: 508–3944424



7 CFR ANSI/ICEA S84-608–1988 Standard for Telecommunications Cable, 1755.390; 1755.890

Filled, Polyolefin Insulated, Copper Conductor Technical Require

ments. ANSI/ICEA S-89-648–1993, Standard for Telecommunications Aerial 1755.702; 1755.703;

Service Wire, Technical Requirements (Approved by ANSI July 1755.704

11, 1994). American National Standards Institute/National Fire Protection Association (ANSV NFPA)

Copies are available from NFPA, Batterymarch Park, Quincy, Massa

chusetts 02269, telephone number 1 (800) 344-3555 NFPA 70–1993, National Electrical Code

1755.870 American National Standards Institute

1430 Broadway, New York, New York 10018 ANSI 05.1983 Standard for Wood Products Structural Glued Lami- 1728.201; 1728.202

nated Timber for Utility Structures. ANSI S1.4–1983, Specification for Sound Level Meters, including 1755.397; 1755.522

Amendment S1.4A-1985.
American Society for Testing and Materials

1916 Race Street, Philadelphia, PA 19103, Tel.: 215-299-5400
ASTM A 109–91, Standard Specification for Steel, Strip, Carbon, 1755.910

ASTM A 153–82 (Reapproved 1987), Standard Specification for Zinc 1755.910

Coating (Hot-Dip) on Iron and Steel Hardware.
ASTM A 366/A 366M–91, Standard Specification for Steel, Sheet, 1755.910

Carbon, Cold-Rolled, Commercial Quality.
ASTM A 475–78 Specification for Zinc-Coated Steel Wire Strand 1772.370
ASTM A 505–87 Standard Specification for Steel, Sheet and Strip1755.390; 1755.860;
Alloy, Hot-Rolled and Cold-Rolled, General Requirements for.

1755.890 ASTM A 525–91b, Standard Specification for General Requirements 1755.910

for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process. ASTM A 526/A 526/M–90, Standard Specification for Steel Sheet, 1755.910

Zinc-Coated (Galvanized) by the Hot-Dip process, Commercial Qual

ity. ASTM A 569/A 569M-91a, Standard Specification for Steel, Carbon 1755.910

(0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial

ASTM A 621/A 621M–92, Standard Specification for Steel, Sheet 1755.910

and Strip, Carbon, Hot-Rolled, Drawing Quality.
ASTM A 640–91, Standard Specification for Zinc-Coated Steel Strand 1755.900(a)(7);
for Messenger Support of Figure 8 Cable.

(1)(2); (1)(2)(ii);

(1)(2)(iii) ASTM B 3–90, Standard Specification for Soft or Annealed Copper 1755.860

Wire. ASTM B 33–91, Standard Specification for Tinned Soft or Annealed 1755.397; 1755.522; Copper Wire for Electrical Purposes.

1755.870 ASTM B 117-90, Standard Test Method of Salt Spray (Fog) Testing 1755.910 ASTM B 193–87 Standard Test Method for Resistivity of Electrical 1755.390; 1755.860; Conductor Materials.

1755.890 ASTM B 244–80 Standard Classification of Coppers

1755.390; 1755.860;

1755.890 ASTM B 539–90, Standard Test Methods for Measuring Contact Re- 1755.910

sistance of Electrical Connections (Static Contacts).


7 CFR ASTM B 633–85, Standard Specification for Electrodeposited Coatings 1755.910

of Zinc on Iron and Steel. ASTM B 694–86 Standard Specification for Copper, Copper Alloy, 1755.390; 1755.860;

and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable 1755.890

ASTM B 736–92a, Standard Specification for Aluminum, Aluminum 1755.900(a)(7);
Alloy, and Aluminum-Clad Steel Cable Shielding Stock.

(k)(8); 1755.870 ASTM D9–87 (Reapproved 1992), Standard Terminology Relating to 1728.201; 1728.202

ASTM D 150–87, Standard Test Methods for A-C Loss Characteristics 1755.868

and Permittivity (Dielectric Constant) of Solid Electrical Insulating

ASTM D 257–91, Standard Test Methods for D-C Resistance of Con- 1755.860

ductance of Insulating Materials.
ASTM D 523–89, Standard Test Method for Specular Gloss

1755.910 ASTM D 610–85 (Reapproved 1989), Standard Test Method for Evalu- 1755.910

ating Degree of Rusting on Painted Steel Surfaces. ASTM D 822–89, Standard Practice for Conducting Tests on Paint 1755.910

and Related Coatings and materials using Filtered Open-Flame Car

bon-Arc Light and Water Exposure Apparatus. ASTM D 1238-90b, Standard Test Method for Flow Rates of Thermo- 1755.860; plastics by Extrusion Plastometer.


(m)(5)(i) ASTM D 1248–84 (1989), Standard Specification for Polyethylene 1755.860; 1755.870; Plastics Molding and Extrusion Materials.

1755.900 (a)(7);
(m)(3)(i); (m)(3)(ii);

(m)(3)(v) ASTM D 1535–89, Standard Test Method for Specifying Color by 1755.860; 1755.870; the Munsell System.


(d)(2); 1755.910 ASTM D 1654–92, Standard Test Method for Evaluation of Painted 1755.910

or Coated Specimens Subjected to Corrosive Environments. ASTM D 1693–70 (Reapproved 1988), Standard Test Method for Envi- 1755.910

ronmental Stress-Cracking of Ethylene Plastics. ASTM D 2197–86 (Reapproved 1991), Standard Test Method for Ad- 1755.910

hesion of Organic Coatings by Scrape Adhesion. ASTM D 2247–92, Standard Practice for Testing Water Resistance 1755.910

of Coatings in 100% Relative Humidity. ASTM D 2287–81 (Reapproved 1988), Standard Specification for 1755.870

Nonrigid Vinyl Chloride Polymer and Copolymer Molding and

Extrusion Compounds.
ASTM D 2436–85, Standard Specification for Forced-Convection Lab- 1755.870

oratory Ovens for Electrical Insulation.
ASTM D 2565–92, Standard Practice for Operating Xenon Arc-Type 1755.910

Light-Exposure Apparatus With and Without Water for Exposure

of Plastics.
ASTM D 2633–82 (Reapproved 1989), Standard Methods of Testing 1755.870

Thermoplastic Insulations and Jackets for Wire and Cable.
ASTM D 2794–92, Standard Test Method for Resistance of Organic 1755.910

Coatings to the Effects of Rapid Deformation (Impact).


7 CFR ASTM D 3349-86, Standard Test Method for Absorption Coefficient 1755.860; of Carbon Black Pigmented Ethylene Plastic.


(m)(3)(vii) ASTM D 3928–89, Standard Test Method for Evaluation of Gloss 1755.910

or Sheen Uniformity. ASTM D 4101-82 (1988), Standard Specification for Propylene Plastic 1755.860; 1755.870

Injection and Extrusion Materials. ASTM D 4565–90a, Standard Test Methods for Physical and Environ- 1755.390; 1755.860;

mental Performance Properties of Insulations and Jackets for Tele- 1755.870;
communications Wire and Cable.

(c)(6)(i); (k)(10);

(m)(5)(v); App. A ASTM D 4566–90, Standard Test Methods for Electrical Performance 1755.390; 1755.860;

Properties of Insulations and Jackets for Telecommunications Wire 1755.870; and Cable.

1755.890; 1755.900(a)(7);

(s)(5) ASTM D 4568–86, Standard Test Methods for Evaluating Compatibil- 1755.860;

ity between Cable Filling and Flooding Compounds and Polyolefin 1755.900(a)(7); Cable Materials.

(8)(3); (1)(2); (k)(9) ASTM D 4872–88, Standard Test Method for Dielectric Testing of 1755.860

Wire and Cable Filling Compounds.
ASTM E 8-91, Standard Test Methods of Tension Testing of Metallic 1755.860

Materials; and.
ASTM E 29–90, Standard Practice for Using Significant Digits in 1755.860; 1755.870;
Test Data to Determine Conformance with Specifications.


(1)(2) ASTM G 21-90, Standard Practice for Determining Resistance of 1755.910

Synthetic Polymeric Materials to Fungi.
ASTM G 23–90, Standard Practice for Operating Light-Exposure Appa- 1755.910

ratus (Carbon-Arc Type) With and Without Water for Exposure
of Nonmetallic Materials.

American Wood Preservers' Association (AWPA)

P.O. Box 286, Woodstock, Maryland 21163–0286
American Wood Preservers' Association-Book of Standards, 1991 1728.201; 1728.202

A1-91, Standard Methods for Analysis of Creosote and Oil-Type
A2-91, Standard Methods for Analysis of Waterborne Preservatives
and Fire-Retardant Formulations.
A3–91, Standard Methods for Determining Penetration of Preserva-
tives and Fire Retardants.
A5-91, Standard Methods for Analysis of Oil-Borne Preservatives
A6–89, Method for the Determination of Oil-Type Preservatives
and Water in Wood.
A7–75, Standard Wet Ashing Procedure for Preparing Wood for
Chemical Analysis.
A9–90, Standard Method for Analysis of Treated Wood and Treating
Solutions by X-Ray Spectroscopy.


A11-83, Standard Method for Analysis of Treated Wood and Treat-
ing Solutions by Atomic Absorption Spectroscopy.
C1-91, All Timber Products—Preservative Treatment by Pressure
C4-91, Poles—Preservative Treatment by Pressure Processes
C8–91, Western Red Cedar and Alaska Yellow Cedar Poles-Pre-
servative Treatment by the Full-Length Thermal Process.
C10–91, Lodgepole Pine Poles—Preservative Treatment by the Full-
Length Thermal Process.
C12-90, Western Larch Poles-Full-Length Preservative Treatment
by Thermal Process.
M1–90, Standard for the Purchase of Treated Wood Products
M2–91, Standard for Inspection of Treated Timber Products
M3–81, Standard Quality Control Procedures for Wood Preserving
M4-91, Standard for the Care of Preservative-Treated Wood Prod-
P1/P13-91, Standard for Coal Tar Creosote for Land and, Fresh
Water and Marine (Coastal Water Use).
P5–91, Standards for Waterbone Preservatives
P8–91, Standards for Oil-Borne Preservatives
P9-91, Standards for Solvents and Formulations for Organic Pre-

servative Systems.
Bell Communications Research (Bellcore)

Bellcore Customer Service, 60 New England Ave., Piscataway, NJ

08854, tel.: 1-800-521-2673
Document SR-TSV-002275, BOC Notes on the LEC Networks—1990, 1755.522

Issue 1, March 1993.
Document TR-TSY-000508, Automatic Message Accounting, Section 1755.522

8.1, Issue 2, July 1987.
Document TR-TSY-000008, Issue 2, August 1987, Digital Interface 1755.397

between the SLC 96 Digital Loop Carrier System and a Local Digital

Document TR-TSY-000057, Issue 1, April 1987, including Revision 1755.397

1, November 1988, Funcational Criteria for Digital Loop Carrier

Document TR-NWT-000303, Issue 2, December 1992, including Revi- 1755.397

sion 1, December 1993, Integrated Digital Loop Carrier System

Generic Requirements, Objectives, and Interface. Electronic Industries Association and/or Telecommunications Industries Association (EIA TLA)

Global Engineering Documents, 15 Inverness Way East, Englewood,

CO 80112, Telephone: 303–792–2181
EIA 455–20, Measurement of Change in Optical Transmittance


(9)(1)(iii)(B) EIA/TIA 455-25A, Repeated Impact Testing of Fiber Optic Cables 1755.900(a)(9); and Cable Assemblies.

(9)(2)(iii) EIA/TIA 455–30B, Frequency Domain Measurement of Multimode 1755.900(a)(9); Optical Fiber Information Transmission Capacity.

(p)(2)(vi) EIA/TIA 455-31B, Fiber Tensile Proof Test Method



« PreviousContinue »