The Code of Federal Regulations of the United States of America
U.S. Government Printing Office, 1968 - Administrative law
The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.
What people are saying - Write a review
We haven't found any reviews in the usual places.
Other editions - View all
accepted acid amended applied attached authorized barrels body bottles bottom brazing Bureau of Explosives capacity caps carboys carrier certify chap chapter charged chemical closed closure Company complete comply compressed constructed contents cover cushioned cylinders dangerous Date defects devices diameter drums ends equipped exceed exceeding exemption Fiberboard boxes flammable follows gallons gauge glass gross weight head heat hoops inside containers inspection label leakage least length less lined liquid loaded located manufacture marked material maximum ments metal method mixtures motor vehicle nails NOTE openings Order package packed paragraph percent permitted placards Poison pounds per square prescribed pressure prevent rail rated record removed safety seams securely sheets shipments shipped side solid space Spec specification square inch steel strength tainers tank cars thickness threads tion transportation United valves wall welded Wooden boxes
Page 194 - Parts 171-179 of this chapter are those acids, alkaline caustic liquids and other corrosive liquids which, when In contact with living tissue, will cause severe damage of such tissue, by chemical action; or in case of leakage, will materially damage or destroy other freight by chemical action; or are liable to cause fire when in contact with organic matter or with certain chemicals.
Page 301 - ... holding fire from sparks. A car with a roof generally decayed, even if tight, must not be used. (5) The doors must shut so closely that no sparks can get in at the joints, and, when necessary, they must be stripped. The stripping for doors should be on the inside and be fastened to the door frames where it will form a shoulder against which the closed doors are pressed by means of wedges or cleats in door shoes or keepers. The openings under the doors should be similarly closed. The hasp fastenings...