« PreviousContinue »
hereby incorporated by reference, pur-
(b) MP 250 is available at the follow-
(1) Superintendent of Documents, Government Printing Office, Washington, D.C. 20402.
(2) Office of Technical Information and Publications, National Bureau of Standards, Washington, D.C. 20234.
(3) Field offices of the Office of Field Services, Department of Commerce.
(4) Federal Depository Libraries.
(c) Revisions, amendments, revocations, deletions, recodifications, redesignations, and corrections to MP 250 will be issued from time to time by the National Bureau of Standards, Washington, D.C. 20234, in the form of replacement pages or insert sheets. A postcard is provided in MP 250 for requesting copies of them. NBS will maintain an official historic file of MP 250 and of replacement pages and insert sheets.
(d) Further information concerning policies, procedures, services, and fees may be obtained by writing the Office of Technical Information and Publications, National Bureau of Standards, Washington, D.C. 20234.
SUBCHAPTER B--STANDARD REFERENCE MATERIALS
of Standard Reference Materials Issued PART 230_STANDARD REFERENCE MATERIALS
by the National Bureau of Standards"
describes the standard reference mateSubpart A-General Information
rials and lists the fees charged for those Sec.
$ 230.2 Identification of standards.
The standards are listed by groups; Subpart BPurchase Procedure
the numbers represent the issuance of 230.4 Ordering.
the first representative sample of each 230.5 Terms and shipping.
kind. Renewals are indicated by the 230.6 Standards out of stock.
original number with an added letter to Subpart C—Description of Services and List of denote the relation. Thus, 11a is the first, Fees
11b the second, 11c is the third renewal 230.7 Description of services and list of fees, of No. 11 Basic Open-Hearth Steel, 0.2 incorporation by reference.
percent carbon. In this way, a particular
number always represents a material of AUTHORITY: The provisions of this part 230 issued under sec. 9, 31 Stat. 1450, as amended; fixed or approximately fixed composition. 15 U.S.C. 277. Interprets and applies sec. 7,
$ 230.3 New standards. 70 Stat. 959; 15 U.S.C. 275a.
When new standard reference mateSOURCE: The provisions of this Part 230
rials or renewals of old ones are issued, appear at 32 F.R. 21017, Dec, 29, 1967.
announcement will be made in MP 260 Subpart A-General Information
and in scientific and trade journals. § 230.1 Introduction.
Subpart B-Purchase Procedure
$ 230.4 Ordering.
Orders should be addressed to the Ofto calibrate a measurement system, or to
fice of Standard Reference Materials, produce scientific data that can be re
National Bureau of Standards, Washingferred to a common base. NBS Miscel
ton, D.C. 20234, and should give the laneous Publication 260, “Standard Ref
amount, number, and name of the standerence Materials: Catalog and Price List
ards requested. For example: 150 grams
tion d be uoi
of No. 11g Basic Open-Hearth Steel, 0.2 percent C. The list of standard materials, their numbers, prices, and composition or intended use are given in MP 260. These materials are distributed only in the units listed. $ 230.5 Terms and shipping.
(a) Domestic shipments. Shipments of material (other than hydrocarbons, organic sulfur compounds and radioactive standards) intended for the United States, Mexico, and Canada are normally shipped prepaid parcel post (providing that the parcel does not exceed the weight limits as prescribed by postal laws and regulations) unless the purchaser requests a different mode of shipment, in which case the shipment will be sent collect. It is impractical for the Bureau to prepay shipping charges and add this cost to the billing invoice. Hydrocarbons, organic sulfur compounds, rubber compounding materials, viscometer calibrating oils, and radioactive standards are shipped express collect. No discounts are given to NBS Standard Reference Materials.
(b) Foreign shipments. Small shipments will be forwarded as a U.S. Goyernment shipment via International Parcel Post, providing that the parcel does not exceed the weight limits as prescribed by postal laws and regulations to foreign countries. Shipments exceeding the parcel post weight limit must be handled through an agent (shipping or brokerage firm) located in the United States as designated by the purchaser. Parcels will be packed for overseas shipment and forwarded via express collect to the U.S. firm designated as agent.
(c) Payment for domestic orders. Invoices for standard reference materials to be used within the United States of America are mailed when shipment is made. Remittances, made payable to the National Bureau of Standards, are required within thirty (30) days of shipment. Prepaid orders are accepted at the prices current on the date of receipt of the order.
(d) Payment for foreign orders. Remittances in payment of foreign orders must be made payable to the National Bureau of Standards, and are required in advance. These remittances are payable
in dollars. Prices for the materials are those current at the date of receipt of the order. $ 230.6 Standards out of stock.
The preparation of "renewals" is intended to be completed at the time each kind of material becomes exhausted, but owing to delays encountered in obtaining a proper grade of material, and for other reasons, this is not always possible. If orders are received for standard reference materials that are out of stock, notice will be mailed to that effect. The composition of a "renewal” will not usually be identical with that of its predecessor, but it will be quite similar, especially with regard to the characteristic constituent or constituents. Subpart C—Description of Services
and List of Fees § 230.7 Description of services and list
of fees, incorporation by reference. (a) The text of the current edition of NBS Miscellaneous Publication 260, “Standard Reference Materials: Catalog and Price List of Standard Reference Materials Issued by the National Bureau of Standards” is hereby incorporated by reference pursuant to 5 U.S.C. 552(a) (1) and 1 CFR Part 20. MP 260 states the authority under which the National Bureau of Standards offers standard reference materials, describes the standard reference materials which are available, states the procedure for ordering the materials, and lists the fees charged for the materials.
(b) MP 260 is available at the following places: Superintendent of Documents, Government
Printing Office, Washington, D.C. 20402. Office of Technical Information and Publica
tions, National Bureau of Standards, Wash
ington, D.C. 20234. Field Offices of the Office of Field Services,
Department of Commerce.
(c) Revisions, amendments, revocations, deletions, recodifications, redesignations, and corrections will be issued from time to time by the National Bureau of Standards, Washington, D.C. 20234, in the form of replacement pages or insert sheets, and an official historic file will be maintained by the National Bureau of Standards. A form, included in MP 260, is provided for requesting
replacement pages or insert sheets.
SUBCHAPTER C-TRANSCRIPT SERVICES
141-1.10 “A True Standard," 1954; 438 feet; PART 235-TRANSCRIPT SERVICES
running time 12 minutes. Sec.
141-1.11 "Four Experiments in Hydraulics," 235.1 Motion pictures.
1953; 607 feet; running time 161/2 minutes. 235.2 Charges for certifications,
141-1.12 "Silicate Cement,” 1947; 657 feet; 235.8 Charges for searching records and for
running time 18 minutes. copying records and documents.
141-1.13 “Dental X-Ray Equipment: AlterAUTHORITY: The provisions of this Part 236 ation for Modern Radiation Hygiene,” 1959; issued under R.8. 161; 5 U.S.C. 22; 56 Stat. 629 feet; running time 18 minutes. 1067, 5 U.S.C. 606. 49 Stat. 292; 15 U.S.C. 141-1.14 “Dental Materials: Specification 1898.
and Certification," 1955; 766 feet; running
time 21 minutes. SOURCE: The provisions of this part 235
141-1.15 “A Porcelain Jacket Crown Techappear at 27 F.R. 12711, Dec. 22, 1962, unless otherwise noted.
nique,” 1955; 856 feet; running time 23
minutes. $ 235.1 Motion pictures.
141-1.16 “Dental Burs in Action,” 1955; 365 (a) The films listed in paragraph (c) feet; running time 10 minutes. of this section are available on loan from 141–1.17 “Hazards of Dental Radiography,"
1954; 505 feet; running time 13 minutes, the National Bureau of Standards free
141-1.18 “A Method of Mixing Silicate of charge. The borrower, however, is
Cement,” 1953; 329 feet; running time 81%2 required to pay return parcel post and
minutes. insurance charges. Requests for the films
141-1.19 “The Casting of Dental Gold Alshould be directed to the Office of Tech
loys: Thermal Expansion Technique,' nical Information and Publications, Na- 1951; 632 feet; running time 1642 minutes. tional Bureau of Standards, Washington, 141–1.20 “Denture Resin,” 1949; 657 feet; D.C. 20234.
running time 18 minutes, (b) Prints may be purchased by writ- 141-1.21 “Dental Amalgam: Failure Caused ing to the above address for "authoriza
by Moisture Contamination,” 1948; 502 tion to purchase" forms and instructions.
feet; running time 15 minutes.
141-1.22 “Dental Roentgenographic Film Completed forms, upon approval by the
Characteristics and Use in Radiation National Bureau of Standards, authorize
Hygiene,” 1962; 754 feet; running time 20 duplication of the film by a commercial
minutes. firm who will ship the film and bill the
(R.S. 161; 5 U.S.C. 301) [32 F.R. 10198, July purchaser direct.
11, 1967] (c) All films are 16mm sound and color.
$ 235.2 Charges for certifications. ITEM AND DESCRIPTION
(a) The charge for each certification 141–1.1 "Preparation of White Cast-Iron
as to the official nature of copies of corStandards,” 1965; 550 feet; running time respondence and records from the files, 15/2 minutes.
publications and other documents of the 141-1.2 "Calibration of the Platinum Re
National Bureau of Standards, including sistance Thermometer," 1964; 575 feet;
the affixing of the Department of Comrunning time 16 minutes. 141-1.3 Mixing Nonhomogeneous Air
merce seal, is 50 cents. Streams," 1964; 225 feet; running time 6
(b) For information concerning titles minutes.
and prices of Bureau publications, ad141-1.4 "Scatter Radar: Space Research dress inquiries to the Office of Technical from the Ground," 1963; 864 feet; running Information, National Bureau of Standtime 23 minutes.
ards, Washington 25, D.C. 141–1.5 "Ultrasonic Thermometer," 1962; 145 feet; running time 4 minutes.
§ 235.3 Charges for searching records 141–1.6 "Trapping of Free Radicals at Low
and for copying records and docu. Temperatures,” 1960; 510 feet; running
ments, time 131/2 minutes. 141-1.7 "Understanding the Physical World
The charge for photocopies of records Through Measurement,” 1957; 1,120 feet;
and documents is 25 cents a copy. This running time 33 minutes.
charge does not apply to copies of data 141–1.8 "Assignment-Weights and Meas
and reports or certificates relating to ures,” 1957; 674 feet; running time 18
tests performed by the National Bureau minutes.
of Standards. Charges for documents 141–1.9 "Testing Mass Standards by Substitution," 1956; 809 feet; running time 22
relating to tests are published in Part minutes.
200 of this chapter,
PART 240—BARRELS AND OTHER
CONTAINERS FOR LIME Sec. 240.1 Title of act. 240.2 Application. 240.3 Permissible sizes. 240.4 Definitions. 240.5 Required marking. 240.6 Tolerances.
AUTHORITY: The provisions of this Part 240 issued under sec. 4, 39 Stat. 531; 15 U.S.C. 240, unless otherwise noted.
SOURCE: The provisions of this Part 240 appear at 13 F.R. 8372, Dec. 28, 1948, unless otherwise noted. § 240.1
Title of act. The act, "Public Law 228, 64th Congress," approved August 23, 1916 (39 Stat. 530; 15 U.S.C. 237–242), entitled “An Act to standardize lime barrels,” shall be known and referred to as the “Standard Lime-Barrel Act." & 240.2 Application.
The rules and regulations in this part are to be understood and construed to apply to lime in barrels, or other containers packed, sold, or offered for sale for shipment from any State or Territory or the District of Columbia to any other State or Territory or the District of Columbia; and to lime in containers of less capacity than the standard small barrel sold in interstate or foreign commerce; and to lime imported in barrels from a foreign country and sold or offered for sale; also to lime not in barrels or containers of less capacity than the standard small barrel, sold, charged for, or purported to be delivered as a large or small barrel or a fractional part of said small barrel of lime, from any State or Territory or the District of Columbia to any other State or Territory or the District of Columbia. § 240.3 Permissible sizes.
Lime in barrels shall be packed only in barrels containing 280 pounds or 180 pounds, net weight. For the purposes of this section the word "barrel” is defined as a cylindrical or approximately cylindrical vessel, cask or drum. (Sec. 2, 39 Stat. 530; 15 U.S.C. 238)
& 240.4 Definitions,
(a) The term "container of less capacity than the standard small barrel,” as mentioned in section 3 of the law and as used in the rules and regulations in this part, is defined as any container not in barrel form containing therein a net weight of lime of less than 180 pounds.
(b) The term "label" as used in the rules and regulations in this part is defined as any printed, pictorial, or other matter upon the surface of a barrel or other container of lime subject to the provisions of this act, or upon cloth or paper or the like which is permanently affixed to it by pasting or in a similar manner.
(c) The term "tag" is defined as a tough and strong strip of cloth or paper or the like, bearing any printed, pictorial, or other matter, which is loose at one end and which is secured to a container of lime subject to the provisions of the act. (Sec. 3, 39 Stat. 530; 15 U. 3. C. 239) 8 240.5 Required marking.
(a) The lettering required upon barrels of lime by section 2 of the law shall be as follows: The statement of net weight shall be in bold-face capital letters and figures at least 1 inch in height and not expanded or condensed;
shall be clear, legible, and permanent, and so placed with reference to the other lettering that it is conspicuous. The name of the manufacturer of the lime and where manufactured, and, if imported, the name of the country from which it is imported, shall be in boldface letters at least one-half inch in height and not expanded or condensed, and shall be clear, legible, conspicuous, and permanent. None of these letters and figures shall be superimposed upon each other, nor shall any other characters be superimposed upon the required lettering or otherwise obscure it. All the above statements shall form parts of the principal label.
(b) The information required upon containers of lime of less capacity than the standard small barrel by section 3 of the law shall be included in a label: Provided, however, That in order to allow the utilization of second-hand or returnable bags made of cloth, burlap, or the like, such information may be upon a
tag firmly attached to the container in of the country from which it is imported, a prominent and conspicuous position. shall be in bold-face letters and figures In case a tag is used to give the required not less than one-eighth inch in height information there must not be any label (12-point capitals), and not expanded or another tag upon the container which or condensed, and shall be clear, legible, bears any statement having reference to conspicuous, and permanent. None of lime, or any statement of weight what- these letters and figures shall be superever, which is not identical with the in- imposed upon each other nor shall any formation upon the tag mentioned other characters be superimposed upon above; if a container is to be utilized the required lettering or otherwise obwhich bears any such inaccurate infor- scure it. All the above statements shall mation upon a label, such container shall be included upon the same side of the be turned inside out or such information tag. shall be obliterated in so far as it is in- (e) In case the lime is actually packed accurate by blotting out the letters or in barrels in containers of less figures; or if such inaccurate informa- capacity than the standard small barrel tion is upon a tag, by removing such tag. by some person other than the manu
(c) If the required lettering is upon a facturer of the lime, the information label, the statement of net weight shall mentioned above must be given in the be in bold-face capital letters and fig- manner there described, and in addition ures at least three-fourths inch in there must be a statement to this effect: height and not expanded or condensed; "Packed by it shall be clear, legible, and perma- (giving the name and address of the nent, and so placed with reference to packer). This statement shall be in the other lettering that it is con- letters not smaller than is specified for spicuous. The word "net" shall form the general statement required in the part of the statement of weight. The case of barrels and containers of less name of the manufacturer of the lime capacity than the standard small barrel, and the name of the brand, if any, under respectively (see paragraphs (a) and (b) which it is sold, and, if imported, the of this section); it shall not be obscured name of the country from which it is im- and shall form part of the principal ported, shall be in bold-face letters at label or be upon the same side of the tag least one-half inch in height and not as in those cases provided. expanded or condensed, and shall be (f) In the case of all lime sold in bar. clear, legible, conspicuous, and perma- rels, the actual place of manufacture of nent. None of these letters and figures the lime shall be stated on the barrel. shall be superimposed upon each other, In general, this will be the name of the nor shall any other characters be super- post office nearest or most accessible to imposed upon the required lettering or the plant. However, when the actual otherwise obscure it. All the above place of manufacture of the lime and statements shall form parts of the prin
the offices of the company are separated cipal label.
but are within the boundaries of the (d) If the required lettering is upon
same county of a State, or when, though a tag, the statement of net weight shall
not within the boundaries of the same be in bold-face capital letters and figures county they are so close together that not less than one-half the height of the the post-office address of the offices largest letters or figures used upon such represents substantially and to all intag: Provided, however, That in every tents and purposes the actual place of case they shall be not less than one
manufacture of the lime, then the posteighth inch in height (12-point capi
office address of the offices of the comtals), and not expanded or condensed.
pany will be suficient: Provided, howThe word "net" shall form part of the
ever, That the address given shall always statement of weight. The statement
correctly show the State in which the shall be clear, legible, and permanent, lime is actually manufactured. and so placed with reference to the other
(g) More than one place of manulettering that it is conspicuous. The
facture of a manufacturer shall not be name of the manufacturer of the lime,
shown on the same barrel unless the one and the name of the brand, if any, under
at which the particular lime in question which it sold, and, if imported, the name is manufactured is pointed out.