 Where an inclined chute is employed such chute shall be constructed of 1-inch planed boards, with side guards 4 inches high extending 3 inches above top face of bottom of chute and throughout its length, -fastened with brass screws. D-shaped...  Port Series - Page 28by United States. Board of Engineers for Rivers and Harbors - 1940Full view - About this book
 | United States - 1919 - 898 pages
...constructed of 1-inch planed boards, with side guards 4 inches high extending 3 inches above top face of bottom of chute and throughout its length, -fastened...more than 6 inches apart and running lengthwise of chute, must be fastened to the upper surface of the bottom board by means of glue and wooden pegs extending... | |
 | Henry Burnell Faber - Fireworks - 1919 - 300 pages
...less than 1 inch in thickness, with side guards extending not less than 3 inches above the top face of bottom of chute and throughout its length, fastened...inches apart and running lengthwise of the chute, to be fastened to the upper pegs extending through the bottom board of the chute and through the runners.... | |
 | Ordance Department - 1919 - 300 pages
...less than 1 inch in thickness, with side guards extending not less than 3 inches above the top face of bottom of chute and throughout its length, fastened...inches apart and running lengthwise of the chute, to be fastened to the upper pegs extending through the bottom board of the chute and through the runners.... | |
 | E.I. du Pont de Nemours & Company - 1920 - 112 pages
...constructed of 1-inch planed boards, with side guards 4 inches high extending 3 inches above top face of bottom of chute and, throughout its length, fastened with brass screws. "D" shaped strips or runners, not more than 6 inches apart, and running lengthwise of chute, must be... | |
 | Harbors - 1939 - 578 pages
...constructed of 1-inch planed boards with side boards 4 inches high, extending 3 inches above top face of bottom of chute and throughout its length fastened...6 inches apart and running lengthwise of the chute shall be fastened to the upper surface of the bottom part by means of glue and wooden pegs extending... | |
 | Harbors - 1936 - 256 pages
...constructed of 1-inch planed boards with side boards 4 inches high, extending 3 inches above top face of bottom of chute and throughout its length fastened with brass screws. D_shaped strips or runners not more than 6 inches apart and running lengthwise of the chute must be... | |
 | United States. Army. Corps of Engineers War Department - Carquinez Strait (Calif.) - 1925 - 24 pages
...constructed of 1-inch planed boards with side boards 4 inches high, extending 3 inches above top face of bottom of chute and throughout its length fastened...screws. D-shaped strips or runners not more than 6 niches apart and running lengthwise of the chute must be fastened to the upper surface of the bottom... | |
 | Maritime law - 1927 - 364 pages
...constructed of 1-inch planed boards with side' boards 4 inches high, extending 3 inches above top face of bottom of chute and throughout its length fastened with brass screws. D-sIiaped strips or runners not more than 6 inches apart and running lengthwise of the chute must be... | |
 | U.S. Coast and Geodetic Survey - Pilot guides - 1937 - 402 pages
...constructed of 1-inch planed boards with side guards 4 inches high, extending 3 inches above top face of bottom of chute and throughout its length fastened...running lengthwise of the chute must be fastened to the npper surface of the bottom part by means of glue and wooden pegs extending through the bottom part... | |
 | Administrative law - 1939 - 998 pages
...constructed of 1-inch planed boards with side boards 4 inches high, extending 3 inches aoove top face of bottom of chute and throughout its length fastened...6 inches apart and running lengthwise of the chute shall be fastened to the upper surface of the bottom part by means of glue and wooden pegs extending... | |
| |
