NOTE SAME PRICES FOR METRIC AS FOR CORRESPONDING INCH SIZES OF COMBINATION SQUARE. STARRETT PATENT COMBINATION SQUARE No. 11. With hardened blade. THE LS 31STARRETTICO ATHOL. 5 MASS Every tool warranted accurate. With the adjustable scale this forms one of the most convenient and useful tools ever devised for mechanics' use. It is a complete substitute for a whole set of common try squares, and is one of the best gauges made for transferring exact measurements or laying out work. It is also convenient for a depth gauge or to square in a mortise. For a miter it is perfect, while with the auxiliary center head it forms a centering square, both inside and outside, which for convenience and accuracy has no equal. The blades are hardened and graduated with heavy figures, reading both ways. The 6, 9, 12, 18, and 24 inch have levels (in their stocks) and center heads, and will be sent complete unless otherwise ordered. The 18 and 24 inch have same stock and center head as 12-inch. The blades are graduated in No. 4, No. 1, No. 2, No. 7, and No. 16 graduations. Those of No. 4 graduation being most used, will be sent unless otherwise ordered. STARRETT PATENT COMBINATION SQUARE No. 11m. The same as No. 11, except that the blade is graduated in millimeters and milli meters. EXCELLENT EXAMPLE OF SAME TOOL WORKING TO BOTH METRIC AND CUSTOMARY (INCH) MEASURES. The same as No. 11, except that the blades are graduated in metric and English, as follows: One side graduated in millimeters and 32ds, the reverse side graduated in millimeters and 64ths. UNFINISHED SNAP GAUGE BLANKS, WHICH CAN BE FINISHED IN THE SHOP EITHER INCH OR METRIC SIZES WITHOUT EXTRA COST. B. & S. DROP-FORGED STEEL SNAP GAUGE BLANKS. These gauge blanks are drop-forged from the best tool steel and carefully annealed. The allowance for finish on these blanks is so arranged that all intermediate sizes between those listed can be secured. Sizes 31", 3, and 4" are without handles. |