Commodity Stabilization Service Building Kansas City, Missouri Section 5 Movable Partitions 5-1. Extent. This shall include the furnishing and installing of approximately 578 linear feet of 5'-6" high movable type metal partitions as indicated on drawing and as hereinafter specified. Partitions shall be erected 24 above finished floor complete with all necessary anchors, fastenings and Accessories. 5-2. Partitions are laid out to 3'-0" modular size except for 2 which are 4'-0". Partitions shall be free standing and laid out to fit the locations. Widths of panels shall be substantially as shown on the drawing no. 27-14. 5-3. Frames shall be so designed that panels can be readily removed for repairs and replacements; or to most economically utilize panels with the least amount of waste in the event of being removed and reinstalled in other locations. 5-4. The finished work shall be strong and rigid, neat in appearance and free from defects. Plain surfaces shall be smooth and free from warp or buckle. Molded members shall be clean cut, straight and true. Miters shall be well formed and true alignment. Fastenings shall be concealed where practicable. 5-5. Partitions shall be erected under competent supervision in a rigid and substantial manner, straight and plumb and with horizontal lines level. Metal surfaces shall be cleaned and left free from scratches or other abrasions. 5-6. Submit shop drawings or catalog data to Regional Office for approval. 5-7. Materials. Steel members which support and frame the partitions shall be of 18 gauge minimum cold rolled steel. Inserts having no stress may be of 20 gauge. All steel shall have a rust resisting prime coat. 5-8. Panels shall be 1-9/16" thick, of wallboard. Outer layers shall be laminated to core of same material. Finished partitions shall not exceed 1-3/4" except for stud base flanges. 5-9. Painting. All new metal, woodwork and plasterboard shall be painted two coats to match adjoining work. 5-10. Glass in partitions shall be obscure, 7/32" thick, not more than 2'-0" high, in modules to suit the panels. End of Specification DLJ/JJM/npe 1. All work shall be carried out in strict accordance with specifications dated December 8, 1959, and this Addendum No. 1, dated December 9, 1959. 2. Paragraph 4-2. Delete "None" and insert "Movable Partitions, Paragraph 5-6." 3. Attention of Bidders: All bidders must acknowledge on Form of Bid the receipt of this addendum giving number and date. DLJ/JM/zlh 58364 0-60- -19 Ralph L. Warren Design and Construction Division Exhibit 18--General Services Administration Standard Form 19, showing General Services Administration Public Buildings Service, Region 6 2306 East Bannister Road' Kansas City 31, Misscuri TE ISSUE": Commodity Stabilization Svs. Troll to in correspone:) December 8, 1959 ID RECEIVING OFFICE General Services Administration Public Buildings Service, Region 6 TANG HATERING MAY T TAIME FOM THE ISSUING ICE SEALJE BLS in Quadruplicate covoring work described in specifications, schedules, drawings and conditi.as title and dated as follows:' New Movable Partitions will to reocived at the Bid Receiving Office until an! then publicly opored. December 8, 1959 Addendum #1 13 Sunlod envelopes centrining bids shail to addressed to the Did Receiving Office and shall be marked tʊ show: DIC (This Section than completo i by idder) 30 -TATE DI SUPHITTER: ཥཉ་འ་ ་ specified in strict sccordance with the a!, videntifis! &cuments and the Gen rol Provisions on the reverso keroci, with Thombuds 1. That he is in art, a small business concern. For this purea, a small!usinna enem is eno that (n) is in pently-owned a Sporat. 1, (b) is net minent in its fiel! ego, atsa, and (2) with offiliates, bol overage annual receipts for the precing three yours of $3,000,000.00 or less. (Suc Cota of Federal Ropulatiolle, datle 18, art 198, s amended, for all lition I inforaction) 2. That he creates as an ♫ in'ividual, ^3 portaership, corporation, incurpointe! in Stato o!. The undersigned further agrees, if this bid exceeds $ 2, COO to CCMPLY with the Lator Standards Provisions Applicable to Contracts in Excess of $2,000 (Standard Form 19 in lieu of those in Provision 10 hereof; TO PAY not less than the minimum hourly rates of wages set forth in the specifications; and TO FURNISH a performance bond in an amount equal to 100% and a payment bond in an amount to 50% of the contract price with surety or sureties acceptable to the Government. lds over $2,000 in amcunt must be accompanied by bid guarantee of 2% of amount of You are directed to proced with the work upon receipt of this Award. Notics to proceed will be issued upon receipt of acceptablɔ payment and performance bonds. Acceptability of Bond Verited Bund Contracting Officer Exhibit 19--Payment bond, Henges Company, Inc. of Kansas City, Mo., principal and surety, January 6, 1960 KNOW ALL MEN BY THESE PRESENTS, That we, the PRINCIPAL and SURETY above named, are held and firmly bound unto the United States of America, hereinafter called the Government, in the penal sum of the amount stated above, for the payment of which sum well and truly to be made, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally, firmly by these presents. THE CONDITION OF THIS OBLIGATION IS SUCH, that whereas the principal entered into a certain contract with the Government, numbered and dated as shown above and hereto attached; NOW THEREFORE, if the principal shall promptly make payment to all persons supplying labor and material in the prosecution of the work provided for in said contract, and any and all duly authorised modifications of said contract that may hereafter be made, notice of which modifications to the surety being hereby waived, then this obligation to be void; otherwise to remain in full force and virtue. IN WITNESS WHEREOF, the above-bounden parties have executed this instrument under their several seals on the date indicated above, the name and corporate seal of each corporate party being hereto affixed and these presents duly signed by its undersigned representative, pursuant to authority of its governing body. |