Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers: A Selection of Papers from the 9th International Symposium, Paris, France, 27 June - 1 July 2005Philippe Marcus, Vincent Maurice Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers contains a selection of papers presented at PASSIVITY-9, the 9th International Symposium on the Passivation of Metals and Semiconductors and the Properties of Thin Oxide Layers, which was held in Paris, 27 June - 1 July, 2005. One hundred and twelve peer-reviewed manuscripts have been included. The book covers all the fundamental and applied aspects of passivity and provides a relevant and updated view of the advances and new trends in the field. It is structured in ten sections: • Growth, (Nano)structure and Composition of Passive Films • Passivity of Semiconductors • Electronic Properties of Passive Films • Passivity Issues in Biological Systems • Passivity in High-Temperature Water • Mechanical Properties of Passive Films,• Passivity Issues in Stress Corrosion Cracking and Tribocorrosion • Passivity Breakdown and Localized Corrosion • Modeling and Simulation • Surface Modifications and Inhibitors (for Improved Corrosion Resistance and/or Adhesion) |
From inside the book
Results 1-5 of 73
Page 4
... specimens. The surface of specimens was finished with 1μm diamond paste polishing. Fe2O3-Cr2O3-MoO2 films about 50 nm thick with various compositions were prepared on Pt substrates by ion-beam sputter deposition technique (Tokyo ...
... specimens. The surface of specimens was finished with 1μm diamond paste polishing. Fe2O3-Cr2O3-MoO2 films about 50 nm thick with various compositions were prepared on Pt substrates by ion-beam sputter deposition technique (Tokyo ...
Page 30
... Specimens of 1.1x1.1 cm were cut, wet ground, then polished to 6μm diamond paste and ultrasonically cleaned just before the immersion in the test solution. The exposed area was limited by an O-ring defining 0.28 cm2 active surface ...
... Specimens of 1.1x1.1 cm were cut, wet ground, then polished to 6μm diamond paste and ultrasonically cleaned just before the immersion in the test solution. The exposed area was limited by an O-ring defining 0.28 cm2 active surface ...
Page 36
... specimen. Measurements were preformed in PAR cell and the potentials in the text refer to the SCE scale. Prior to measurements, samples were abraded with wet SiC emery paper down to grit size 1000 and were polished successively with ...
... specimen. Measurements were preformed in PAR cell and the potentials in the text refer to the SCE scale. Prior to measurements, samples were abraded with wet SiC emery paper down to grit size 1000 and were polished successively with ...
Page 66
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Page 67
Sorry, this page's content is restricted.
Sorry, this page's content is restricted.
Contents
Section B Passivity of Semiconductors | 231 |
Section C Electronic Properties of Passive Films | 277 |
Section D Passivity Issues in Biological Systems | 349 |
Section E Passivity in HighTemperature Water | 395 |
Section F Mechanical Properties of Passive Films | 437 |
Section G Passivity Issues in Stress Corrosion Cracking and Tribocorrosion | 475 |
Other editions - View all
Passivation of Metals and Semiconductors, and Properties of Thin Oxide ... Philippe Marcus No preview available - 2006 |
Common terms and phrases
acid Acta adsorption AISI alloys aluminium anodised aqueous austenitic B.V. All rights behaviour borate buffer solution capacitance cathodic cation chemical chloride chromium coating composition concentration copper corrosion potential corrosion resistance current density deaerated decrease depth profiles dissolution EDTA effect electrochemical impedance electrode electrolyte Elsevier B.V. experimental Figure formation galvanostatic growth hydroxide immersion increase interface ions iron Keywords kinetics localized corrosion Marcus materials Maurice Editors measurements mechanism Metals and Semiconductors NaCl nano-scratching NaOH nickel observed obtained oxygen Passivation of Metals passive film passive film formed passive layer peak photocurrent pitting pitting corrosion polarization curves potentiodynamic potentiostatic present Properties of Thin reaction repassivation rights reserved rust film samples shows specimens spectra spectroscopy sputtering stainless steel structure substrate surface tantalum temperature tests thickness Thin Oxide Layers titanium values VSCE X-ray X-ray photoelectron spectroscopy
Popular passages
Page 57 - This paper is an independent product of the CNWRA and does not necessarily reflect the views or regulatory position of the NRC.