Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers: A Selection of Papers from the 9th International Symposium, Paris, France, 27 June - 1 July 2005Philippe Marcus, Vincent Maurice Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers contains a selection of papers presented at PASSIVITY-9, the 9th International Symposium on the Passivation of Metals and Semiconductors and the Properties of Thin Oxide Layers, which was held in Paris, 27 June - 1 July, 2005. One hundred and twelve peer-reviewed manuscripts have been included. The book covers all the fundamental and applied aspects of passivity and provides a relevant and updated view of the advances and new trends in the field. It is structured in ten sections: • Growth, (Nano)structure and Composition of Passive Films • Passivity of Semiconductors • Electronic Properties of Passive Films • Passivity Issues in Biological Systems • Passivity in High-Temperature Water • Mechanical Properties of Passive Films,• Passivity Issues in Stress Corrosion Cracking and Tribocorrosion • Passivity Breakdown and Localized Corrosion • Modeling and Simulation • Surface Modifications and Inhibitors (for Improved Corrosion Resistance and/or Adhesion) |
From inside the book
Results 1-5 of 80
Page 4
... Experimental Solution heat-treated high purity Fe-18Cr-xMo alloys (x = 0, 2, 5 and 10 mass %) were used as specimens. The surface of specimens was finished with 1μm diamond paste polishing. Fe2O3-Cr2O3-MoO2 films about 50 nm thick with ...
... Experimental Solution heat-treated high purity Fe-18Cr-xMo alloys (x = 0, 2, 5 and 10 mass %) were used as specimens. The surface of specimens was finished with 1μm diamond paste polishing. Fe2O3-Cr2O3-MoO2 films about 50 nm thick with ...
Page 10
... experiments at different oxidation stages (5.10 -6 Pa O2, 84 μA.cm-2) will be achieved in order to determine the depth distribution of Cr and Fe contents inside the film and its growth mode. 2. Experimental Fe-Cr alloys samples (5, 10 ...
... experiments at different oxidation stages (5.10 -6 Pa O2, 84 μA.cm-2) will be achieved in order to determine the depth distribution of Cr and Fe contents inside the film and its growth mode. 2. Experimental Fe-Cr alloys samples (5, 10 ...
Page 16
... Experimental Fe-15at.%Cr polycrystalline alloy was manufactured by the argon melting method and cut to samples of 7×7×2(mm3) in size. The surface of the samples was mechanically ground with 1000 grit of SiC paper and polished with ...
... Experimental Fe-15at.%Cr polycrystalline alloy was manufactured by the argon melting method and cut to samples of 7×7×2(mm3) in size. The surface of the samples was mechanically ground with 1000 grit of SiC paper and polished with ...
Page 30
... Experimental Part Table 1 summarises the chemical compositions of the four materials studied. Specimens of 1.1x1.1 ... experiments were carried out at room temperature in NaOH 0.1M. An AUTOLAB 30 Potentiostat (from EcoChemie, NL) was ...
... Experimental Part Table 1 summarises the chemical compositions of the four materials studied. Specimens of 1.1x1.1 ... experiments were carried out at room temperature in NaOH 0.1M. An AUTOLAB 30 Potentiostat (from EcoChemie, NL) was ...
Page 33
... Experimental Fitting Figure 6: Cole–Cole plot obtained from the impedance data depicted in the inset of Figures 2, 3 and 4. Figure 7: Experimental and best fitting data corresponding to the Cole–Cole spectra for AISI 316 at 96 h ...
... Experimental Fitting Figure 6: Cole–Cole plot obtained from the impedance data depicted in the inset of Figures 2, 3 and 4. Figure 7: Experimental and best fitting data corresponding to the Cole–Cole spectra for AISI 316 at 96 h ...
Contents
Section B Passivity of Semiconductors | 231 |
Section C Electronic Properties of Passive Films | 277 |
Section D Passivity Issues in Biological Systems | 349 |
Section E Passivity in HighTemperature Water | 395 |
Section F Mechanical Properties of Passive Films | 437 |
Section G Passivity Issues in Stress Corrosion Cracking and Tribocorrosion | 475 |
Other editions - View all
Passivation of Metals and Semiconductors, and Properties of Thin Oxide ... Philippe Marcus No preview available - 2006 |
Common terms and phrases
acid Acta adsorption AISI alloys aluminium anodised aqueous austenitic B.V. All rights behaviour borate buffer solution capacitance cathodic cation chemical chloride chromium coating composition concentration copper corrosion potential corrosion resistance current density deaerated decrease depth profiles dissolution EDTA effect electrochemical impedance electrode electrolyte Elsevier B.V. experimental Figure formation galvanostatic growth hydroxide immersion increase interface ions iron Keywords kinetics localized corrosion Marcus materials Maurice Editors measurements mechanism Metals and Semiconductors NaCl nano-scratching NaOH nickel observed obtained oxygen Passivation of Metals passive film passive film formed passive layer peak photocurrent pitting pitting corrosion polarization curves potentiodynamic potentiostatic present Properties of Thin reaction repassivation rights reserved rust film samples shows specimens spectra spectroscopy sputtering stainless steel structure substrate surface tantalum temperature tests thickness Thin Oxide Layers titanium values VSCE X-ray X-ray photoelectron spectroscopy
Popular passages
Page 57 - This paper is an independent product of the CNWRA and does not necessarily reflect the views or regulatory position of the NRC.