270 TARIFF SCHEDULES OF THE UNITED STATES SCHEDULE 6. - METALS AND METAL PRODUCTS Part 2. Metals, Their Alloys, and Their Basic Shapes and Forms Strip, of iron or steel, not cut, not pressed, and not stamped to nonrectangular shape (except as provided in item 609.17): Other than alloy iron or steel: Not over 0.01 inch in thickness.. Over 0.01 but not over 0.05 inch in thickness.......................... Alloy iron or steel: 609.06 Not over 0.01 inch in thickness. Over 0.05 inch in thickness.. Over 0.05 inch in thickness. Plates, sheets, and strip, all the foregoing, of iron Other than alloy iron or steel: Valued not over 8 cents per pound. Alloy iron or steel.. 609.17 Plates, sheets, and strip, all the foregoing of iron or steel, whether or not cut, pressed, or stamped to nonrectangular shape, if electrolytically coated or plated with base metal other than tin, lead, or zinc..... 10.8 Item TARIFF SCHEDULES OF THE UNITED STATES SCHEDULE 6. - METALS AND METAL PRODUCTS Part 2. - Metals, Their Alloys, and Their Basic Shapes and Forms Articles A.V.E. (Percent) 271 Rates of Duty 1 2 Wire of iron or steel (con.): Flat wire (con.): Alloy iron or steel: Not coated or plated with metal: 609.32 609.80 609.82 Angles, shapes, and sections, all the foregoing, of iron or steel, hot rolled, forged, extruded, or drawn, or cold formed or cold finished, whether or not drilled, punched, or otherwise advanced; sheet piling of iron or steel: Angles, shapes, and sections: Hot rolled; or, cold formed and weighing over 0.29 pound per linear foot: 609.84 609.85 609.88 609.90 Sheet piling: Other than alloy iron or steel.. Alloy iron or steel...... 1.9 *5.0 TARIFF SCHEDULES OF THE UNITED STATES ANNOTATED (1963) SCHEDULE 6. - METALS AND METAL PRODUCTS Part 2. Metals, Their Alloys, and Their Basic Shapes and Forms Articles Rails, joint bars, and tie plates, all the foregoing of steel: A.V.E. (Percent) Pipes and tubes and blanks therefor, all the foregoing of iron (except cast iron) or steel: Welded, jointed, or seamed, with walls not thinner than 0.065 inch, and of circular cross section: Other than alloy iron or steel: 1.0 *5.0 0.05 per lb. 0.1 per lb. 0.05¢ per lb. + 4% ad val. + additional duties (ace headnote 4) 0.1 30 0.125¢ per lb. 0.125 per lb. + 4% ad val. + additional duties (see headnote 4) 8% ad val. + addi tional duties (500 headnote 4) 0.25 per lb. 0.25 per lb. + 8% ad val. +'additional duties (see headnote 4) 610.32 0.375 inch or more in outside diameter. 4.5 0.3¢ per lb. 1.25¢ per lb. 0.75 per lb. |