« PreviousContinue »
Triisobutyl aluminum (see Pyroforic liquids N.O.S.").
Red gas. Trimethylamine, aqueous solution (see: “Dimethylamine, aqueous | Inf. L...
Inf. L------- Red.
in a quantity not exceeding 16 ounces in one outside package). Trinitrobenzoic acid, dry (see: High explosives in dry condition").. Trinitrobenzoic acid, wet, not erceeding 16 ounces....
with not less than 10 pounds oj water to each 90 pounds of dry material"). Trinitrobenzoic acid, wet with not less than 10 percent water, in ercess
Comb. L. *Turpentine substitutes..
Comb. L. *Turpentine substitutes...
Radioactive, Oxy Radioactive and
ounces but not exceeding 85 pounds.
(see: "High explosives"). Ures peroxide (seo “Organic perorides").
Yellow Van or truck body with refrigerating or heating equipment on board sessels
(see $ 146.07-5(d) and $ 146.08-55). Vanadium oxytrichloride
White. Vanadium tetrachloride......
White. *Varnish (see: “Paint, enamel, etc.)..
Comb. L. •Varnish (see: "Paint, enamel, etc.")..
Red. •Varnisb driers (see: "Paint, enamel, etc.").
Comb. I *Varnish driers (see: "Paint, enamel, etc.").
Red. *Varnish remover or reducer (see:"Compounds, lacquer, etc., remov Comb. L.
ing, reducing, or thinning liquid").
ing, reducing or thinning, liquid").
moving, reducing or thinning, liquid").
moving, reducing or thinning. liquid").
Red. Vinyl chloride...
Red gas. Vinyl fluoride, inhibited.
Red gas. Vinyl fluoride inhibited, cold.
Red gas. Vinyl methyl ether, inhibited.
Red gas. Vinyl trichlorosilane (see: "Ethyl trichlorosilane")..
Red. Vinylidene chloride, inhibited...
Yellow. Waste textile, wet (see: "Rags, wet").
Yellow. Waste wool, wet (see: "Rags, wet")...
Yellow. *Water treatment compound, liquid..
White. Water white (export shipment only) (see: “Kerosene").
Comb. L. *Waxes, liquid.
Comb. L.. *Weed killing compounds, liquid (see: “Compounds, tree or weed
killing, liquid"). Wet hair (see: "Hair, wet").
Yellow Wet nitrocellulose-30 percent alcohol or solvent.---
Red. Wet nitrocellulose-20 percent water...
Yellow Wet nitrocellulose, colloided, granular or flake-20% alcohol or solvent; Inf. L.
Red. or block-25% alcohol. Wet nitrocellulose, colloided, granular or flake-20 percent water - Inf. s.
Yellow Wet nitrocellulose flakes-20 percent alcohol or solvent (see: "Wet Inf. L.-.
Red. nitrocellulose, colloided, granular or flake-20 percent alcohol or
solvent'). Wet nitroguanidine-20 percent water...
Yellow. Wet nitrostarch-30 percent alcobol or solvent...
Red. Wet nitrostarch-20 percent water...
Yellow Wet paper stock (see: "Paper stock, w
Yellow. Wet rags (see: “Rags, wet") --
Yellow Wet textile waste (see: "Rags, wet")------
Yellow. * Unless otherwise exempt by the provisions of the detalled regulations. NOTE: The entry for Vinyl fluoride inhibited, cold is effective Nov. 10, 1972.
* Unless otherwise exempt by the provisions of the detailed regulations. (Sec. 1, 49 Stat. 1889, 46 U.S.C. 391a) (CGFR 57-33, 22 F.R. 8560, Oct. 29, 1957.) For amend. ments to this table see the List of Sections Affected. Subpart 146.05—Shipper's Require. Methods of preparation, packing, test
ments Regarding Packing, Marking, ing and records, insofar as they effect Labeling and Shipping Papers
safety in transportation shall be open to
inspection by & duly authorized repre& 146.05–1 Shipments in violation of sentative of the U.S. Coast Guard. the regulations in this part.
(b) When quantity limitations are No permitted explosives or other dan specified in the regulations in this part gerous articles or substances and com by U. S. liquid measure or by avoirdupois bustible liquids shall be tendered for weight, it is authorized that quantities shipments on board vessels except when measured by the metric system may be in compliance with the provisions of the substituted, up to but not exceeding 1 regulations in this part.
gallon for liquids and 10 pounds for (Order 74, 8 FR. 288, Jan. 11, 1941]
solids, on the basis of 1 liter per quart
specified and 500 grams per pound & 146.05–2 Acceptable shipments.
specified. (a) Permitted explosives or other dan
Order 74, 6 F.R. 268, Jan. 11, 1941, as gerous articles or substances may be of
amended by Order 129, 6 F.R. 8182, July 1, fered to vessels for transportation and
1941; CGFR 47–35, 12 P.R. 4184, June 27, storage provided they are in proper con- 1947) dition for transportation or storage and are as defined and are packed, marked,
8 146.05–3 Prohibited packing. labeled, described, certified and other- (a) Outside containers having interior wise acceptable as provided for herein. packages containing substances possess
ing different dangerous characteristics. the mixture of which is liable to cause evolution of heat or gas or produce & corrosive acting substance, shall not be offered for transportation or storage on board vessels to which the regulations in this part apply unless so packed as to prevent admixture.
(b) The offering for transportation of any package or container of any liquid, solid or gaseous material which under conditions incident to transportation may polymerize (combine or react with itself) or decompose so as to cause dangerous evolution of heat or gas is prohibited. Such materials may be offered for transportation when properly stabilized or inhibited.
(c) The offering for transportation of any package or container of any material which will cause a dangerous evolution of heat or gas under conditions normally incident to transportation is prohibited.
(d) The offering for transportation of any package containing & cigarette lighter charged with fuel and equipped with an ignition element, or any similar heating, lighting, or ignition device, or any self-lighting cigarette, is prohibited unless the design and method of packaging are such that functioning of the device is not possible incident to transportation. (CGFR 53-54, 18 F.R. 8230, Dec. 16, 1953, as amended by CGFR 55--20, 20 F.R. 4053, June 10, 1955; CGFR 57-33, 22 F.R. 8571, Oct, 29, 1957; CGFR 57-49, 22 F.R. 10060, Dec. 14, 1957) § 146.05-4 Prescribed packaging.
(a) The regulations in this subchapter prescribe four groups of outside packaging for use in shipping permitted explosives or other dangerous articles or substances as follows:
(1) DOT and ICC specification packaging.
(2) M.I.N. specification packaging. (See $ 146.05-7.)
(3) C.F.C. specification packaging. (See $ 146.05-7.)
(4) Nonspecification packaging.
(b) In the interest of national defense or at such times as it shall be determined that the interest of safety would not be impaired, the use of packagings other than those specified in this part, for the transportation of permitted explosives and other dangerous articles or substances may be authorized in the discretion of and upon special permit to be issued by the Commandant of the Coast Guard. CROSS REFERENCE: For Canadian shipments, see $ 146.02-9. (CGFR 68-142, 34 F.R. 2086, Feb. 12, 1969) $ 146.05-5 DOT and ICC specification
packaging. (a) Department of Transportation and Interstate Commerce Commission packaging authorized herein for use in the transportation of permitted explosives or other dangerous articles or substances must have been made and marked in compliance with specifications prescribed by the Department of Transportation or the Interstate Commerce Commission in effect at the date of manufacture of the packaging. References in the regulations of this subchapter to the Interstate Commerce Commission and ICC shall be understood to include the Department of Transportation and DOT, respectively.
(b) Packagings not specified herein made previous to effective date of the regulations in this part and authorized for use under the regulations of the Department of Transportation, which may be continued in use, are as follows:
105A300, 105A400, 105A500, and 105A600ifications 21A or 21B fiber drums manumay also be accepted; and when DOT- factured prior to June 27, 1962 may be 106A500 tank cars are authorized, tank used for commodities and weights for cars marked DOT-106A800 may also be which they were previously authorized accepted.
until further order of the Department of (d) Tank cars. The regulations of the Transportation. Department of Transportation, govern (k) Where the regulations require ing the transportation of explosives and DOT-6D or 37M cylindrical steel overother dangerous articles authorize the packs, DOT-6J or 37A (single trip conuse of fusion welded tanks on tank cars. tainer) metal drums manufactured prior The fusion welded tank cars correspond to March 18, 1964, having an inside DOTing to the specification shown in the 28, 2SL, 2T, or 2TL polyethylene contables herein as an acceptable container tainer, may be continued in use for the are also authorized for acceptance on commodities and gross weights for which board vessels. These cars will be marked they were previously authorized until by a "W" added to the specification further order of the Department of marking; For example, "DOT-103A” will Transportation. carry the marking "DOT-103A-W", etc. (1) Where the regulations specify use
(e) Cylinders of foreign manufacture of metal drums that may be constructed received from foreign countries for with full removable head, the opening charging with compressed gas may be
size into the drum shall be restricted to charged and shipped for export when in
the diameter size specified by the DOT compliance with regulations governing
regulations for the dangerous article such charging and shipping as promulgated by the Department of Transporta
concerned. tion. Bill of lading or other shipping
(m) Containers used for shipments of paper shall, when possible, identify the
etching acid liquid, n.o.s. must not be cylinder and shall carry the following
reused for shipment of any commodity. certification:
Order 74, 6 F.R. 268, Jan. 11, 1941, as amendThese cylinders have been retested and ed by Order 129, 6 F.R. 3182, July 1, 1941; refilled in accordance with the Depart
CGFR 53-26, 18 F.R. 6216, Sept. 1, 1953; CGFR
56-29, 21 F.R. 7055, Sept. 20, 1956; CGFR 59ment of Transportation requirements for
14, 24 F.R. 5268, June 30, 1959; CGFR 60-33, export.
25 F.R. 5236, June 11, 1960; CGFR 60-70, 25 (f) Where the regulations require
F.R. 11210, Nov. 26. 1960; CGFR 62-11, 27 DOT-37A and 37B single trip metal F.R. 5281, June 5, 1962; CGFR 64-20, 29 F.R. drums, DOT-37D, 37E, 37F, 37G, and 37H 6789, May 23, 1964; CGFR 65–17, 30 F.R. single trip metal drums may be con 7438, June 5, 1965; CGFR 68–142, 34 F.R. tinued in use for commodities and gross
2087, Feb. 12, 1969; CGFR 69-72, 34 F.R. weights for which they were previously
17486, Oct. 29, 1969) authorized until further order of the De $ 146.05–6 M.I.N. specification conpartment of Transportation.
tainers. (g) (Reserved] (h) Where the regulations limit the
Specification containers of the U.S. gross weight of DOT specifications port
Coast Guard are prescribed herein for able tanks to 8,000 pounds, these portable
use in the transportation of comtanks of gross weight not over 20,000
bustible liquids and hazardous articles pounds may be used provided the lifting and for export shipments of inflammagear used to load and discharge the tank ble liquids. Such containers shall be is of suficient capacity to safely handle made and marked in compliance with the weight.
specifications of the regulations in this (i) Where the regulations require part. Containers that do not comply specification DOT-22C or DOT-15P
with such specifications shall not be wooden or plywood boxes or drums, spec
marked to indicate compliance. ifications DOT-1F or 1G polyethylene carboys in wooden or plywood boxes or
NOTE. Certain other specifcations are also
set forth herein such as for built-in magadrums respectively, may be continued in
zines, portable magazines, portable multiuse for the commodities and capacities
unit containers, and metal lockers used in for which they were previously author the stowage on board vessels of explosives or ized until further order of the Depart other dangerous articles. ment of Transportation.
[Order 74, 6 F.R. 269, Jan. 11, 1941, as (j) Where the regulations require amended by CGFR 47-35, 12 F.R. 4184, June specification DOT-21C fiber drums, spec 27, 1947)
8 146.05–7 C.F.C. specification con
tainers. (9) Metal barrels or drums. constructed and marked in accordance with specifications of the Consolidated Freight Classification, Rule 40, section 5, of capacities not exceeding 110 gallons, are permitted by the regulations in this part for use in transportation or storing combustible liquids on board passenger vessels. Single-trip containers, manufactured under Rule 40, are not authorized for such use.
(b) For shipments comprising C.F.C. specification metal barrels or drums the bill of lading or other shipping paper is required to show the following certii. cate over the written or stamped facsimile signature of the shipper or his duly authorized agent:
The C.F.C. metal barrels or drums used for this shipment are marked in compliance with requirements of Rulo 40, section 6, of the Consolidated Freight Classification.
(c) The requirements as to marking will not be necessary for metal barrels or drums, equivalent to C.F.C. Rule 40 barrel or drums, when manufactured in foreign countries, but bill of lading or other shipping paper shall bear the following certificate over the written or stamped facsimile signature of the shipper or his duly authorized agent:
The metal barrels or drums used for this shipment are of foreign manufacture and conform to construction requirements of Rule 40, section 5, of the Consolidated Freight Classification.
(d) Solid Aberboard or double-faced corrugated fiberboard boxes constructed in accordance with specifications of the Consolidated Freight Classification, Rule 41, section 2, of capacities not exceeding 90 pounds weight of box and contents, are permitted by the regulations in this part for use in transporting or storing combustible liquids, in inside containers, on board passenger vessels.
(e) Fiberboard boxes that are made to conform to specifications of Rule 41, section 2, must bear certificate of box maker showing that the boxes do so conform Boxes used for shipment of combustible liquids shall be marked by printing or stenciling or stamping thereon: (1) The name of the commodity within the container; or (2) The words "Combustible Liquid". This marking shall be block type, not less than 42 inch high, and shall be imposed under, above or to either side of the box maker's certificate. Marking
shall be in block type letters, inside a heavy black-line border. (Order 74, 6 F.R. 269, Jan. 11, 1941) § 146.05–8 Non-specification containers.
Metal barrels or drums, wooden barrels or kegs, wooden boxes, fiberboard boxes, burlap bags, multiwall paper bags and bales comprise the type of non-specification containers that are permitted for certain regulated substances. The detalled regulations in the tables for the various classifications set forth the requirements governing such containers where permitted. The design and construction of non-specification containers must be such as to prevent the occurrence of defects that permit leakage of their contents and strong enough to stand, without failure, all shocks ordinarily incident to handling and stowage during transit. The shipper's attention is called to the regulation in the various tables which requires the oficer in charge of loading the vessel to satisfy himself that a non-specification container oifered for transportation, when containing a permitted substance, is sufficient in all respects for the purpose intended. (Order 74, 6 FR. 269, Jan. 11, 1941) 8 146.05-9 Specification packaging for
outside packages. Outside specification packaging may be shipped tightly overpacked in strong outside fiberboard boxes or drums; wooden boxes, barrels, or crates; metal barrels or drums; or other enclosures, under the following conditions:
(a) The package must contain no explosives or corrosive liquids other than
(1) Electrolyte, as listed in § 146.23100;
(2) Electric storage batteries containing electrolyte; or
(3) Fire extinguisher charges.
(b) The outermost packaging must be marked with the prescribed name of contents and labeled as required by the regulations in this part.
(c) Packaging which is required by the regulations in this part to be marked “This Side Up” or “This End Up" must be placed in the overpack with filling holes up and the overpack must be properly marked "This Side Up" or "This End Up."
(d) The outside of the overpack must also be marked "Inside Packages Comply with Prescribed Specifications" unless the specification markings on the inside