FINDING AIDS A list of CFR titles, subtitles, chapters, subchapters and parts and an alphabetical list of agencies publishing in the CFR are included in the CFR Index and Finding Aids volume to the Code of Federal Regulations which is published separately and revised annually. Material Approved for Incorporation by Reference Table of CFR Titles and Chapters Alphabetical List of Agencies Appearing in the CFR List of CFR Sections Affected Material Approved for Incorporation by Reference (Revised as of July 1, 1993) The Director of the Federal Register has approved under 5 U.S.C. 552(a) and 1 CFR Part 51 the incorporation by reference of the following publications. This list contains only those incorporations by reference effective as of the revision date of this volume. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see the preliminary pages of this volume. 30 CFR CHAPTER II (PART 250) MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR 30 CFR American Concrete Institute P.O. Box 19150, Detroit, Michigan 48219 ACI Standard 318-83, Building Code Requirements for Reinforced 250.138(b)(4)(i), (b)(6)(i), (b)(7). (b)(8)(i), (b)(9), (b)(10), (c)(3), (d)(1)(v), (d)(5), (d)(6), (d)(7), (d)(8), (d)(9), (e)(1)(i), and (e)(2)(i) 250.138(c)(2), and (c)(3) ACI Standard 357-R-84, Guide for the Design and Construction of 250.130(g); American Institute of Steel Construction, Inc. P.O. Box 4588, Chicago, Illinois 60680. AISC Standard S326, Specification for the Design, Fabrication and 250.137(b)(1)(ii), American National Standards Institute Sales Department, 1430 Broadway, New York, New York 10018 American Society of Mechanical Engineers United Engineering Center, 345 East 47th Street, New York, New ANSI/ASME Boiler and Pressure Vessel Code, Section I, Power Boil- ANSI/ASME Boiler and Pressure Vessel Code, Section IV, Heating (c)(4)(ii), and 250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i) 250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i) 30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR-Continued ANSI/ASME Boiler and Pressure Vessel Code, Section VIII, Pressure Vessels, Divisions 1 and 2 including Nonmandatory Appendices, 1983 Edition, with Summer and Winter 1983 and 1984 and Summer 1985 Addendas. 30 CFR 250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i) ANSI/ASME B 31.8-1986, Gas Transmission and Distribution Piping 250.1; 250.152(a) Systems. ASME/ANSI SPPE-1-1988, and SPPE-1a-1988, SPPE-1b-1989, SPPE1c-1989, and SPPE-1d-1990 (addenda), Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations. ANSI B 16.5-1981, Pipe Flanges and Flanged Fittings ANSI Z88.2-1980, Practices for Respiratory Protection The American Petroleum Institute 1220 L Street, NW., Washington, D.C. 20005. 250.1; 250.126(c)(2), (e)(1), and (3) 250.1; 250.152(b)(2) 250.1; 250.67(h)(2)(iv), and (h)(6)(i) API Spec Q1, Specification for Quality Programs, Third Edition, June 250.1; 250–126(c)(3) 1990, API Stock No. 811-00001. API RP 2A, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms, Eighteenth Edition, September 1, 1989, API Stock No. 811-00200. 250.1; 250.130(g); 250.142(a) API RP 2D, Recommended Practice for Operation and Maintenance of 250.1; 250.51(g): API RP T-2, Recommended Practice for Qualification Programs for API Spec 6A, Specification for Wellhead and Christmas Tree Equip- 250.260(g) 250.1; 250.210(a); 250.212(a), and (c) 250.1; 250.152(b)(1), and (b)(2) API Spec 6D, Specification for Pipeline Valves, End Closures, Connec- 250.1; 250.152(b)(1) API Spec 14A. Specification for Subsurface Safety Valve Equipment, 250.1; 250.126(c)(3), (e)(2), and (3) API RP 14B, Recommended Practice for Design Installation, and Oper- 250.1; 250.126(d) 07180. API Spec 14D, Specification for Wellhead Surface Safety Valves and 250.1; 250.122(b), 250.152(d); 250.291(c) and 250.1; 250.126(c)(3), 30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR—Continued API RP 14E, Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems, Fourth Edition, April 15, 1984. API RP 14F, Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms, Second Edition, July 1, 1985. API RP 14G, Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms, Second Edition, May 1, 1986, API Stock No. 811-07194. API RP 14H, Recommended Practice for Use of Surface Safety Valves API RP 500B, Recommended Practice for Classification of Areas for 30 CFR 250.1; 250.122(e)(3); 250.1; 250.126(d) 250.1; 250.53(b); 250.291(b)(3) and API Standard 2545, Method of Gaging Petroleum and Petroleum Prod- 250.1; 250.180(f)(2)(ii) ucts, October 1965, API Stock No. 852-25450. API Standard 2550, Method for Measurement and Calibration of Up- 250.1; 250.180(f)(2)(i) right Cylindrical Tanks, First Edition, October 1965, API Stock No. 852-25500. API Standard 2551, Standard Method for Measurement and Calibra- 250.1; 250.180(f)(2)(i) tion of Horizontal Tanks, First Edition, 1965, API Stock No. 85225510. API Standard 2552, Measurement and Calibration of Spheres and 250.1; 250.180(f)(2)(i) Spheroids, First Edition, 1966, API Stock No. 852-25520. API Standard 2555, Method for Liquid Calibration of Tanks, First 250.1; 250.180(f)(2)(i) Edition, September 1966, API Stock No. 852-25550. API RP 2556, Recommended Practice for Correcting Gage Tables for 250.1; 250.180(f)(2)(i) API Manual of Petroleum Measurement Standards, Chapter 4, Proving API Manual of Petroleum Measurement Standards, Chapter 5.1, Fore- 250.1; 250.180(c)(6)(i), and (d)(3)(iv) 250.1; 250.180(c)(6)(ii) API Manual of Petroleum Measurement Standards, Chapter 5.2, Meas- 250.1; 250.180(c)(6)(ii) urement of Liquid Hydrocarbons by Displacement Meter Systems, First Edition, January 1977, API Stock No. 852-30102. API Manual of Petroleum Measurement Standards, Chapter 5.3, Tur- 250.1; 250.180(c)(6)(ii) bine Meters, First Edition, July 1976, API Stock No. 852-30103. API Manual of Petroleum Measurement Standards, Chapter 5.4, Instru- 250.1; 250.180(c)(6)(ii) mentation or Accessory Equipment for Liquid Hydrocarbon Meter ing Systems, First Edition, July 1976, API Stock No. 852-30104. API Manual of Petroleum Measurement Standards, Chapter 5.5, Fideli- 250.1; 250.180(c)(6)(ii) API Manual of Petroleum Measurement Standards, Chapter 6.1, LACT 250.1; 250.180(c)(6) (iii)(A) |