FINDING AIDS

A list of CFR titles, subtitles, chapters, subchapters and parts and an alphabetical list of agencies publishing in the CFR are included in the CFR Index and Finding Aids volume to the Code of Federal Regulations which is published separately and revised annually.

Material Approved for Incorporation by Reference

Table of CFR Titles and Chapters

Alphabetical List of Agencies Appearing in the CFR
Redesignation Table

List of CFR Sections Affected

Material Approved for Incorporation by Reference

(Revised as of July 1, 1993)

The Director of the Federal Register has approved under 5 U.S.C. 552(a) and 1 CFR Part 51 the incorporation by reference of the following publications. This list contains only those incorporations by reference effective as of the revision date of this volume. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see the preliminary pages of this volume.

30 CFR CHAPTER II (PART 250)

MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR

30 CFR

American Concrete Institute

P.O. Box 19150, Detroit, Michigan 48219

ACI Standard 318-83, Building Code Requirements for Reinforced 250.138(b)(4)(i),
Concrete, plus Commentary on Building Code Requirements for
Reinforced Concrete (ACI 318R-83).

(b)(6)(i), (b)(7).

(b)(8)(i), (b)(9), (b)(10), (c)(3),

(d)(1)(v), (d)(5),

(d)(6), (d)(7),

(d)(8), (d)(9),

(e)(1)(i), and

(e)(2)(i)

250.138(c)(2), and

(c)(3)

ACI Standard 357-R-84, Guide for the Design and Construction of 250.130(g);
Fixed Offshore Concrete Structures, 1984.

American Institute of Steel Construction, Inc.

P.O. Box 4588, Chicago, Illinois 60680.

AISC Standard S326, Specification for the Design, Fabrication and 250.137(b)(1)(ii),
Erection of Structural Steel for Buildings, 1978 Edition.

American National Standards Institute

Sales Department, 1430 Broadway, New York, New York 10018

American Society of Mechanical Engineers

United Engineering Center, 345 East 47th Street, New York, New
York 10017.

ANSI/ASME Boiler and Pressure Vessel Code, Section I, Power Boil-
ers, including Appendices, 1983 Edition, with Summer and Winter
1983 and 1984 and Summer 1985 Addendas.

ANSI/ASME Boiler and Pressure Vessel Code, Section IV, Heating
Boilers, including Nonmandatory Appendices A, B, C, D, E, F, H, I,
and J and the Guide to Manufacturers Data Report Forms, 1983
Edition, with Summer and Winter 1983 and 1984 and Summer 1985
Addendas.

(c)(4)(ii), and
(c)(4)(vii)

250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i)

250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i)

30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR-Continued

ANSI/ASME Boiler and Pressure Vessel Code, Section VIII, Pressure Vessels, Divisions 1 and 2 including Nonmandatory Appendices, 1983 Edition, with Summer and Winter 1983 and 1984 and Summer 1985 Addendas.

30 CFR

250.1; 250.123(b)(1), and (b)(1)(i); 250.292(b)(1) and (b)(1)(i)

ANSI/ASME B 31.8-1986, Gas Transmission and Distribution Piping 250.1; 250.152(a) Systems.

ASME/ANSI SPPE-1-1988, and SPPE-1a-1988, SPPE-1b-1989, SPPE1c-1989, and SPPE-1d-1990 (addenda), Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations.

ANSI B 16.5-1981, Pipe Flanges and Flanged Fittings

ANSI Z88.2-1980, Practices for Respiratory Protection

The American Petroleum Institute

1220 L Street, NW., Washington, D.C. 20005.

250.1; 250.126(c)(2),

(e)(1), and (3)

250.1; 250.152(b)(2) 250.1; 250.67(h)(2)(iv), and (h)(6)(i)

API Spec Q1, Specification for Quality Programs, Third Edition, June 250.1; 250–126(c)(3) 1990, API Stock No. 811-00001.

API RP 2A, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms, Eighteenth Edition, September 1, 1989, API Stock No. 811-00200.

250.1; 250.130(g);

250.142(a)

API RP 2D, Recommended Practice for Operation and Maintenance of 250.1; 250.51(g):
Offshore Cranes, Second Edition, June 1984.

API RP T-2, Recommended Practice for Qualification Programs for
Offshore Production Personnel Who Work with Anti-Pollution
Safety Devices, Revised October 1975.

API Spec 6A, Specification for Wellhead and Christmas Tree Equip-
ment, Fifteenth Edition, April 1, 1986, with Supplement 1, December
1986, API Stock No. 811-03100.

250.260(g) 250.1; 250.210(a); 250.212(a), and (c)

250.1; 250.152(b)(1), and (b)(2)

API Spec 6D, Specification for Pipeline Valves, End Closures, Connec- 250.1; 250.152(b)(1)
tors and Swivels, Eighteenth Edition, January 1982 with Supplement
3, July 1985, API Stock No. 811-03200.

API Spec 14A. Specification for Subsurface Safety Valve Equipment,
Seventh Edition, January 1988 with Supplement 1, August 1989, API
Stock No. 811-07150.

250.1; 250.126(c)(3), (e)(2), and (3)

API RP 14B, Recommended Practice for Design Installation, and Oper- 250.1; 250.126(d)
ation of Subsurface Safety Valve Systems, Second Edition, Novem-
ber 1981 with Supplement 3, June 1986, API Stock No. 811-07160.
API RP 14C, Recommended Practice for Analysis, Design, Installation
and Testing of Basic Surface Safety Systems for Offshore Production
Platforms, Fourth Edition, September 1, 1986, API Stock No. 811-

07180.

API Spec 14D, Specification for Wellhead Surface Safety Valves and
Underwater Safety Valves for Offshore Service, Seventh Edition,
January 1988 with Supplement 1, August 1989, API Stock No. 811-
07183.

250.1; 250.122(b),
(e)(2): 250.123(a),
(b)(2)(i), (b)(4).
(b)(5)(i), (b)(7).
(b)(9)(v). (c)(2);
250.124(a), (a)(5):

250.152(d);

250.291(c) and
(d)(2): 250.292(b)(2)
and (b)(4)(v);
250.293(a)

250.1; 250.126(c)(3),
(e)(2) and (3)

30 CFR CHAPTER II (PART 250)—Continued MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR—Continued

API RP 14E, Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems, Fourth Edition, April 15, 1984.

API RP 14F, Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms, Second Edition, July 1, 1985.

API RP 14G, Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms, Second Edition, May 1, 1986, API Stock No. 811-07194.

API RP 14H, Recommended Practice for Use of Surface Safety Valves
and Underwater Safety Valves Offshore, Second Edition, April 1984,
API Stock No. 811-07196.

API RP 500B, Recommended Practice for Classification of Areas for
Electrical Installations at Drilling Rigs and Production Facilities on
Land and on Marine Fixed and Mobile Platforms, Third Edition,
October 1, 1987, API Stock No. 811-06000.

30 CFR

250.1; 250.122(e)(3);
250.291(b)(2) and
(d)(3)
250.1; 250.53(c);
250.123(b)(9)(v);
250.292(b)(4)(v)
250.1; 250.123(b)(8),
and (b)(9)(v);
250.292(b)(3) and
(b)(4)(v)

250.1; 250.126(d)

250.1; 250.53(b);
250.122(e)(4)(i);
250.123(b)(9)(i);

250.291(b)(3) and
(d)(4)(i);
250.292(b)(4)(i)

API Standard 2545, Method of Gaging Petroleum and Petroleum Prod- 250.1; 250.180(f)(2)(ii) ucts, October 1965, API Stock No. 852-25450.

API Standard 2550, Method for Measurement and Calibration of Up- 250.1; 250.180(f)(2)(i) right Cylindrical Tanks, First Edition, October 1965, API Stock No. 852-25500.

API Standard 2551, Standard Method for Measurement and Calibra- 250.1; 250.180(f)(2)(i) tion of Horizontal Tanks, First Edition, 1965, API Stock No. 85225510.

API Standard 2552, Measurement and Calibration of Spheres and 250.1; 250.180(f)(2)(i) Spheroids, First Edition, 1966, API Stock No. 852-25520.

API Standard 2555, Method for Liquid Calibration of Tanks, First 250.1; 250.180(f)(2)(i) Edition, September 1966, API Stock No. 852-25550.

API RP 2556, Recommended Practice for Correcting Gage Tables for 250.1; 250.180(f)(2)(i)
Incrustation, First Edition, August 1968, API Stock No. 852-25560.

API Manual of Petroleum Measurement Standards, Chapter 4, Proving
Systems, First Edition, May 1978, API Stock No. 852-30080.

API Manual of Petroleum Measurement Standards, Chapter 5.1, Fore-
word, General Considerations and Scope, First Edition, November
1976, API Stock No. 852-30101.

250.1; 250.180(c)(6)(i),

and (d)(3)(iv)

250.1; 250.180(c)(6)(ii)

API Manual of Petroleum Measurement Standards, Chapter 5.2, Meas- 250.1; 250.180(c)(6)(ii) urement of Liquid Hydrocarbons by Displacement Meter Systems,

First Edition, January 1977, API Stock No. 852-30102.

API Manual of Petroleum Measurement Standards, Chapter 5.3, Tur- 250.1; 250.180(c)(6)(ii) bine Meters, First Edition, July 1976, API Stock No. 852-30103.

API Manual of Petroleum Measurement Standards, Chapter 5.4, Instru- 250.1; 250.180(c)(6)(ii) mentation or Accessory Equipment for Liquid Hydrocarbon Meter

ing Systems, First Edition, July 1976, API Stock No. 852-30104.

API Manual of Petroleum Measurement Standards, Chapter 5.5, Fideli- 250.1; 250.180(c)(6)(ii)
ty and Security of Flow Measurement Pulsed Data Transmission
Systems, First Edition, June 1982, API Stock No. 852-30105.

API Manual of Petroleum Measurement Standards, Chapter 6.1, LACT
Systems, First Edition, February 1981, API Stock No. 852-30121.

250.1; 250.180(c)(6)

(iii)(A)