CONTRACT CLAUSES AND SOLICITATION PROVISIONS

7-1912 Limitation of Liability 1-330, insert the following clause.

Service Contract. In accordance with

LIMITATION OF LIABILITY — SERVICE CONTRACT (1974 APR)

(a) Except to the extent that the Contractor is responsible under this contract for deficiencies in the services required to be performed under this contract, including any materials furnished in conjunction therewith, the contractor shall not be liable, by reason of Contractor's performance of services or delivery of materials under this contract, for loss of or damage to property of the Government occurring after Government acceptance of such services.

(b) The foregoing limitations shall not apply as to loss of or damage to property of the Government caused by willful misconduct or lack of good faith on the part of the Contractor's directors or officers, or on the part of any of his managers, superintendents, or other equivalent representatives, who have supervision or direction of:

(i) all or substantially all of the Contractor's business; or

(ii) all or substantially all of the Contractor's operations at any one plant or separate location, in which this contract is being performed; or

(iii) a separate and complete major industrial operation in connection with the performance of this contract.

(c) Notwithstanding paragraph (a) above, if the Contractor carries insurance or has established a reserve for self-insurance covering liability for damages or losses to property of the Government through performance of the services or furnishing of materials under this contract, then the Contractor shall be liable to the Government for such damages or losses to property of the Government to the extent of such insurance or reserve for self-insurance.

(d) The substance of this clause, suitably altered to reflect the relationship of the contracting parties, shall be included in any subcontracts hereunder.

(End of clause)

7-1912

ARMED SERVICES PROCUREMENT REGULATION

CONTRACT CLAUSES AND SOLICITATION PROVISIONS PART 20-CONTRACT CLAUSES AND SOLICITATION PROVISIONS

7-2000 Scope of Part. This part sets forth uniform clauses, provisions, notices, statements, etc., for use in solicitations.

7-2001 Reserved.

7-2002 Required Clauses.

7-2002.1 Contingent Fee. In accordance with 1-506.1, insert the following

clause.

CONTINGENT FEE (1974 APR)

The Offeror/Quoter represents and certifies as part of his proposal/quotation that: (Check all applicable boxes or blocks).

(a) He [] has, [] has not, employed or retained any company or person (other than a full-time, bona fide employee working solely for the offeror/quoter) to solicit or secure this contract, and (b) he [] has, [] has not, paid or agreed to pay any company or person (other than a full-time bona fide employee working solely for the offeror/quoter) any fee, commission, percentage, or brokerage fee contingent upon or resulting from the award of this contract; and agrees to furnish information relating to (a) and (b) above, as requested by the Contracting Officer. (For interpretation of the representation, including the term "bona fide employee", see Code of Federal Regulations, Title 41, Subpart 1-1.5.)

If the offeror/quoter, by checking the appropriate box provided therefor, has represented that he has employed or retained a company or person (other than a full-time bona fide employee working solely for the offeror/quoter) to solicit or secure this contract, or that he has paid or agreed to pay any fee, commission, percentage, or brokerage fee to any company or person contingent upon or resulting from the award of this contract, he shall furnish, in duplicate, a complete Standard Form 119, Contractor's Statement of Contingent or Other Fees. If offeror/quoter has previously furnished a completed Standard Form 119 to the office issuing this solicitation, he may accompany his proposal/quotation with a signed statement (a) indicating when such completed form was previously furnished, (b) identifying by number the previous solicitation or contract, if any, in connection with which such form was submitted, and (c) representing that the statement in such form is applicable to this proposal/quotation.

(End of clause)

7-2002.2 Late Bids, Modifications of Bids or Withdrawal of Bids. The following provision shall be included in all advertised procurements (this replaces paragraphs 7 and 8 of Standard Forms 22 and 33A).

LATE BIDS, MODIFICATIONS OF BIDS OR WITHDRAWAL OF BIDS (1974 SEP)

(a) Any bid received at the office designated in the solicitation after the exact time specified for receipt will not be considered unless it is received before award is made and either:

(i) it was sent by registered or certified mail not later than the fifth calendar day prior to the date specified for the receipt of bids (e.g., a bid submitted in response to a solicitation requiring receipt of bids by the 20th of the month must have been mailed by the 15th or earlier); or,

(ii) it was sent by mail (or telegram if authorized) and it is determined by the Government that the late receipt was due solely to mishandling by the Government after receipt at the Government installation.

(b) Any modification or withdrawal of bid is subject to the same conditions as in (a) above except that withdrawal of bids by telegram is authorized. A bid may also be withdrawn in person by a bidder or his authorized representative, provided his identity is made known and he signs a receipt for the bid, but only if the withdrawal is made prior to the exact time set for receipt of bids.

(c) The only acceptable evidence to establish:

7-2002.2

ARMED SERVICES PROCUREMENT REGULATION

CONTRACT CLAUSES AND SOLICITATION PROVISIONS

(i) the date of mailing of a late bid, modification or withdrawal sent either by registered or certified mail is the U. S. Postal Service postmark on the wrapper or on the original receipt from the U. S. Postal Service. If neither postmark shows a legible date, the bid, modification or withdrawal shall be deemed to have been mailed late. (The term "postmark” means a printed, stamped, or otherwise placed impression that is readily identifiable without further action as having been supplied and affixed on the date of mailing by employees of the U.S. Postal Service.)

(ii) the time of receipt at the Government installation is the time/date stamp of such installation on the bid wrapper or other documentary evidence of receipt maintained by the installation.

(d) Notwithstanding the above, a late modification of an otherwise successful bid which makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.

(End of provision)

7-2002.3 Late Technical Proposals. The following provision shall be included in solicitations covering the first step of two step formal advertising (this replaces paragraphs 7 and 8 of Standard Forms 22 and 33A).

LATE TECHNICAL PROPOSALS, MODIFICATIONS OF TECHNICAL PROPOSALS AND WITHDRAWALS OF TECHNICAL PROPOSALS (1974 APR)

(a) Any proposal received at the office designated in the solicitation after the exact time specified for receipt will not be considered unless it is received before the invitation for bids in Step Two is issued, and

(i) it was sent by registered or certified mail not later than the fifth calendar day prior to the date specified for receipt of offers (e.g., an offer submitted in response to a solicitation requiring receipt of offers by the 20th of the month must have been mailed by the 15th or earlier);

(ii) it was sent by mail (or telegram if authorized) and it is determined by the Government that the late receipt was due solely to mishandling by the Government after receipt at the Government installation; or

(iii) it is the only proposal received.

(b) Any modification of a proposal is subject to the same conditions as in (a)(i) and (ii) above. (c) The only acceptable evidence to establish:

(i) the date of mailing of a late proposal or modification sent either by registered or certified mail is the U. S. Postal Service postmark on the wrapper or on the original receipt from the U. S. Postal Service. If neither postmark shows a legible date, the proposal or modification of proposal shall be deemed to have been mailed late. (The term "postmark” means a printed, stamped, or otherwise placed impression that is readily identifiable without further action as having been supplied and affixed on the date of mailing by employees of the U.S. Postal Service.)

(ii) The time of receipt at the Government installation is the time/date stamp of such installation on the proposal wrapper or other documentary evidence of receipt maintained by the installation.

(d) Proposals may be withdrawn by written notice or telegram received at any time prior to the exact time set for receipt of bids under Step 2. Proposals may be withdrawn in person by an offeror or his authorized representative, provided his identity is made known and he signs a receipt for the proposal prior to the exact time set for receipt of bids under Step 2.

(End of provision)

7-2002.4 Late Proposals. The following provision shall be included in all negotiated solicitations other than the first step of two-step formal advertising, in which case the Late Technical Proposals provision in 7-2002.3 shall be used. (The following provision replaces paragraphs 7 and 8 of Standard Forms 22 and 33A.)

7-2002.4

ARMED SERVICES PROCUREMENT REGULATION

CONTRACT CLAUSES AND SOLICITATION PROVISIONS

LATE PROPOSALS, MODIFICATIONS OF PROPOSALS AND WITHDRAWALS OF PROPOSALS (1974 APR)

(a) Any proposal received at the office designated in the solicitation after the exact time specified for receipt will not be considered unless it is received before award is made; and

(i) it was sent by registered or certified mail not later than the fifth calendar day prior to the date specified for receipt of offers (e.g., an offer submitted in response to a solicitation requiring receipt of offers by the 20th of the month must have been mailed by the 15th or earlier);

(ii) it was sent by mail (or telegram if authorized) and it is determined by the Government that the late receipt was due solely to mishandling by the Government after receipt at the Government installation; or

(iii) it is the only proposal received.

(b) Any modification of a proposal, except a modification resulting from the Contracting Officer's request for "best and final" offer, is subject to the same conditions as in (a)(i) and (ii) above.

(c) A modification resulting from the Contracting Officer's request for "best and final" offer received after the time and date specified in the request will not be considered unless received before award and the late receipt is due solely to mishandling by the Government after receipt at the Government installation.

(d) The only acceptable evidence to establish:

(i) the date of mailing of a late proposal or modification sent either by registered or certified mail is the U. S. Postal Service postmark on the wrapper or on the original receipt from the U.S. Postal Service. If neither postmark shows a legible date, the proposal or modification of proposal shall be deemed to have been mailed late. (The term "postmark" means a printed, stamped, or otherwise placed impression that is readily identifiable without further action as having been supplied and affixed on the date of mailing by employees of the U. S. Postal Service.)

(ii) the time of receipt at the Government installation is the time/date stamp of such installation on the proposal wrapper or other documentary evidence of receipt maintained by the installation.

(e) Notwithstanding the above, a late modification of an otherwise successful proposal which makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.

(f) Proposals may be withdrawn by written notice or telegram received at any time prior to award. Proposals may be withdrawn in person by an offeror or his authorized representative, provided his identity is made known and he signs a receipt for the proposal prior to award.

(End of provision)

7-2003 Clauses to be Used When Applicable.

7-2003.1 Certification of Independent Price Determination. Insert the following in solicitations in accordance with 1-115(a).

CERTIFICATION OF INDEPENDENT PRICE DETERMINATION (1975 OCT)

(a) By submission of this bid or proposal, each bidder or offeror certifies, and in the case of a joint bid or proposal, each party thereto certifies as to its own organization, that in connection with this procurement:

(1) the prices in this bid or proposal have been arrived at independently, without consultation, communication, or agreement, for the purpose of restricting competition, as to any matter relating to such prices with any other bidder or offeror or with any competitor,

(2) unless otherwise required by law, the prices which have been quoted in this bid or proposal have not been knowingly disclosed by the bidder or offeror and will not knowingly be disclosed by the bidder or offeror prior to opening, in the case of a bid, or prior to award, in the case of a proposal, directly or indirectly to any other bidder or offeror or to any competitor; and

7-2003.1

ARMED SERVICES PROCUREMENT REGULATION

CONTRACT CLAUSES AND SOLICITATION PROVISIONS

(3) no attempt has been made or will be made by the bidder or offeror to induce any other person or firm to submit or not to submit a bid or proposal for the purpose of restricting competition.

(b) Each person signing this bid or proposal certifies that:

(1) he is the person in the bidder's or offeror's organization responsible within that organization for the decision as to the prices being bid or offered herein and that he has not participated, and will not participate, in any action contrary to (a)(1) through (a)(3) above; or

(2) (a) he is not the person in the bidder's or offeror's organization responsible within that organization for the decision as to the prices being bid or offered herein but that he has been authorized in writing to act as agent for the persons responsible for such decision in certifying that such persons have not participated, and will not participate, in any action contrary to (a)(1) through (a)(3) above, and as their agent does hereby so certify; and (b) he has not participated, and will not participate, in any action contrary to (a)(1) through (a)(3) above.

(c) This certification is not applicable to a foreign bidder or offeror submitting a bid or proposal for a contract which requires performance or delivery outside the United States, its possessions, and Puerto Rico.

(d) A bid or proposal will not be considered for award where (a)(1), (a)(3), or (b) above has been deleted or modified. Where (a)(2) above has been deleted or modified, the bid or proposal will not be considered for award unless the bidder or offeror furnishes with the bid or proposal a signed statement which sets forth in detail the circumstances of the disclosure and unless it is determined that such disclosure was not made for the purpose of restricting competition.

(End of clause)

7-2003.2 Notice of Total Small Business Set-Aside. In accordance with 1-706.5(c) insert the following clause.

NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (1972 JUL)

(a) Restriction. Offers under this procurement are solicited from small business concerns only and this procurement is to be awarded only to one or more small business concerns. This action is based on a determination by the Contracting Officer, alone or in conjunction with a representative of the Small Business Administration that it is in the interest of maintaining or mobilizing the Nation's full productive capacity, in the interest of war or national defense programs, or in the interest of assuring that a fair proportion of Government procurement is placed with small business concerns. Offers received from firms which are not small business concerns shall be considered nonresponsive and shall be rejected.

(b) Definition. A “small business concern" is a concern, including its affiliates, which is independently owned and operated, is not dominant in the field of operation in which it is offering on Government contracts, and can further qualify under the criteria set forth in regulations of the Small Business Administration (Code of Federal Regulations, Title 13, Section 121.3-8). In addition to meeting these criteria, a manufacturer or a regular dealer submitting offers in his own name must agree to furnish in the performance of the contract end items manufactured or produced by small business concerns: Provided, That this additional requirement does not apply in connection with construction or service contracts.

(End of clause)

7-2003.3 Notice of Partial Small Business Set-Aside. In accordance with 1-706.6(c)(1) or (2), insert the clause in (a) or (b) below.

(a)

NOTICE OF PARTIAL SMALL BUSINESS SET-ASIDE (1975 OCT)

(a) General. Part of this procurement identified in the Schedule as the "set-aside portion," has been set aside for award only to small business concerns. Award of the set-aside portion will be made after awards have been made on the non-set-aside portion.

(b) Procedures.

(1) Determining Eligibility.

7-2003.3

ARMED SERVICES PROCUREMENT REGULATION