(b) Page 2 of Format 803-5.

INSTRUCTIONS FOR USE–INVENTORY SCHEDULE C

WORK IN PROCESS ·

lotter "A" after the amount if the sale (or credit for acquisition) has been authorized or approved by the contracting officer or customer. Insert the letter "C" if the amount represents your offer to acquire or sell. In either case, quantity should also be shown (on a second line) if less than the full quantity shown in column d.

A. CLASSIFICATION.-No classification of items is required.
Finished components are not to be listed on this form but on
Format 803-3. Other items which have not lost their identity
through whole or partial assembly and which are deemed to
have further commercial use are also to be listed on Format 803-3.
B. DESCRIPTION (Column b).-Furnish such description as is suf-
ficient to enable the contracting officer or the customer to deter-
mine the appropriate disposition.
C. CONDITION (Column c).--For material considered to have
possible salvage value other than scrap, insert an "X." It con-
siderod scrap, insert an "S."
D. COST (Columns e ond f).-Any generally recognized basis
for costing inventory may be used, provided it has been regu-
larly used by the contractor and properly reflects his costs.
E. COMMON ITEMS. -- Any items of inventory reasonably usable,
without loss to the contractor on his other work, because they are
materials, parts, or components, common in nature to both the
terminated contract and other work of the contractor, are not to
be listed except for items the delivery of which has been required
by the Government and except for Government-furnished prop.
erty. (Soe Inventory Schedule Certificate.)
F. PROCEEDS OF AUTHORIZED SALE (Column g). Insert the

G. GOVERNMENT-OWNED PROPERTY

(a) Government-furnished property should be listed on sopa. rate sheets, marked to show that the items are Governmentfurnished.

(b) Where title to materials purchased by the contractor is vested in the Government, such materials should be listed and cost data supplied.

H. MISCELLANEOUS

(a) Separate Schedules.-If the space provided for any infor. mation called for is insufficient, attach separate supporting schedules.

(b) Continuation Shoots.-Use Format 803-6 whonover mon than one page is required.

(c) Number of copies. — The number of sets of inventory schod. ules required will be indicated by the contracting officer or the customer from whom the notice of termination is received.

SPECIMENT

§ 1-8.803–6

Format 803–6, Inventory Schedule C—Continuation Sheet (Work in Process).

INVENTORY SCHEDULE C-CONTINUATION SHEET (WORK IN PROCESS)
TERMINATION

O NONTERMINATION
SUBCONTRACT OR P. O. NO.
REFERENCE NUMBER

DATE

GOVERNMENT PRIME CONTRACT NUMBER

§ 1–8.803–7 Format 803–7, Inventory Schedule D (Dies, Jigs, Fixtures, etc., and Special Tools).

(a) Page 1 of Format 803–7.

(b) Page 2 of Format 803-7.

INSTRUCTIONS FOR USE_INVENTORY SCHEDULE D

DIES, JIGS, FIXTURES, ETC., AND SPECIAL TOOLS A. CLASSIFICATION

D. COSTS (Columns e and 1).-Any generally recognized basis for costing o. Homs having no commercial value may be placed in a single classi. inventory may be used, provided it has been regularly used by the contrais fication designated "No Commercial Value." For items deemed to have tor and properly reflects his costs. commercial value, general classifications may be limited to the following:

E. COMMON ITEMS.-Any items of inventory reasonably usable, without Dies Jigs Gouges Fixtures Special Tools

loss to the contractor on his other work, because they are materials, parts, b. Use a new form for each such general classification. Insert the name of

or components, common in nature to both the terminated contract and other the classification in the designated block in the upper right-hand corner of the

work of the contractor, are not to be listed except for items the delivery of form and list the items falling under that classification in sequence. For

which has been required by the Government and except for Governmentexample, on the shoot used to list Dies, group separately all Extruding furnished property. (See Inventory Schedule Certificate.) Dies, all forging Dies, all Forming Dies, etc. On the sheet used for Gouge, group separately all Thread Gauges, all Radius Gauges, all Depth Gauges,

F. PROCEEDS OF AUTHORIZED SALE (Column g).-Insert the letter "A" etc. Whenever possible, listing of Special Tools should identify the names

ofter the amount if the sole (or credit for acquisition) has been authorized and numbers of the parts for which the tools are used, using the Gover

or approved by the contracting officer or customer. Insert the letter "C" mont part number where assigned.

if the amount represents your offer to acquire or sell. in either cose, quan

Nity should also be shown (on a second line) if less than the full quantity 8. DESCRIPTION (Column b).-An adequate commercial description is re.

shown in Column d. quired for all items which have commercial value. For other items, fur G. GOVERNMENT-OWNED PROPERTY nish description sufficient to enable the contracting officer or the customer

(a) Government-furnished property should be listed on separate shoots, to determine the appropriate disposition. Also indicate weight for each

marked to show that the items are Government-furnished. item.

(6) Where tivo moterials purchased by the contractor is vested in the C. CONDITION (Column c).-For purpose of indicating condition of me. Government, guth materials should be listed and cost data supplied. terial, the code indicated below should be used. W requires the combing. tion of a letter and a number in each instance (as E4 or N2). Use the

Ilial foldrate shellures. If the space provided for any information letter "X," without a number, for material considered to have no further

ma Hind ich is lihasuintient, oftach separate supporting schedules. value for use as originally intended, but of possible salvage rolur diler than as scrap. It considered scrap, insort on "S."

We) tontinuation Shoots. Uso format 803-8 whenever more thon one CODE: N- Now

page is required.

y— E-Used-reconditioned

(c) Number of Copies. The number of sets of Inventory schedules rom 0-Used-usable without repairs

quired will be indicated by the contracting officer or the customer from R-Used-repairs required

whom the notice of termination is received.

$ 1-8.803–8 Format 803–8, Inventory Schedule D—Continuation Sheet (Dies, Jigs, Fixtures, etc., and

Special Tools).

INVENTORY SCHEDULE D—CONTINUATION SHEET (DIES, JIGS, FIXTURES, ETC., AND SPECIAL TOOLS)
TERMINATION

NONTERMINATION
GOVERNMENT PRIME CONTRACT NO. SUBCONTRACT OR P.O. NO.

REFERENCE NO. PROPERTY CLASSIFICATION ( See instruction on Format 803-7) DATE